Topics

1

Ultra Hal 7.0 / HAL SCRIPT ERROR NEVER CAME ACROSS BEFORE

« on: December 27, 2020, 04:03:29 pm »

Happy Holiday's to all first of all.

This script error just began to rear it's ugly head and hoping I can get some answers, Tried all the usual fixes, unplugging everything, and some other minor tweaks going back to jus a previous backup that was working just fine.

If you look at the line error in the Hals script dbg file. that address does not exist on my system when tracing it back.

Any help or suggestions would be appreciated at this time. 2020 the year that keeps on giving.

Thank you,
raybe

2

Ultra Hal 7.0 / What is the default?

« on: March 29, 2020, 01:12:19 pm »

First , hope everyone and their families are doing well.

I know the topic doesn't seem clear but what I am asking after may years refers to something I have forgotten, LOL.

When UH starts and you decide not to go into options for what ever the reasons might be and directly select the : "Chat Option"  does UH default to your last settings or unless you you go into option it can be a 50/50 shot if you have more than one DB brain in the selection area?

Thank you again, keep stress levels down be informed gut not overwhelmed, my own opinion,

raybe

3

Ultra Hal 7.0 / Just shoot me, need assistance on re-install

« on: February 05, 2020, 06:16:39 pm »

You would think for as many years and going through this process many times I would retain some knowledge. Had to reinstall Win 10. Back in the day you needed to de- activate your license then Reactivate via the online selection. I totally don't remember anything but that. Tried to just go back to my account on the "Zabaware Page" of my "account" to re download everything I purchased and just substitute the main Zabaware folder with my backup and I totally screwed up. Can anyone please give me the best way to re install and get my files back to where they should be including any Re activation procedures. A little embarrassing to say the least. Its only been 15 yrs or so working with Ultra Hal.

Just as a point of reference, I had last updated to vers. 6.2 before 7 was released and then chose to "merge" {6.2 & 7} the brain feature when upgrading to vers. 7 utilizing my past vers. of 6.2 and not using the online selection feature that is in vers.7. I really would appreciate the time and then you can laugh at me later. Right now the versions are just all over each other and I'm still looking for the correct brain db. File I backed up that has my years of inputting and conversation, Ultra Hal was working perfectly before Win 10 reared its ugly head and the re install. Thank you so very much if possible.
 
Side Note: never noticed because everything was working in the past but the vers. 7 folder within the main Zabaware folder is empty on every vers. I have, thinking that its a result when you choose to merge both 6.2 and 7. vers. together.

raybe

4

Ultra Hal 7.0 / Great to be back, but needing some basic assistance

« on: December 23, 2017, 01:48:03 pm »

Wow , its great to be back. Never stopped using Ultra Hal but never wanted to change it either until now so please bare with me.
First of all hello again to all the familiar and not so familiar friends.

1-Upon Startup first time, comes up with speech stating unvalidated License code
2-No speech or lip sync working based upon using my original character and voice
 My install selection was the migration of 6. with 7
WIN 10 upgrated
I'm wondering if I need to reinstall character expansion pack and voice again as well?, This is bringing back some great memories.

Thank you for any assistance as I am getting my feet wet again on the forum and hunting down some basic answers. Really great to be back.

5

General Discussion / Robert M., have you made your decision ?

« on: July 02, 2016, 02:38:03 pm »

Sorry but I don't get the chance to talk to you privately. Hope you don't mind, but most here only wish you the best. I can only speak for myself that your program plays a role in my everyday life for learning and understanding.

Just wondering if you have made a decision about UltraHal. Feel free to write,"None of my business or when ever I am ready".

Hope things are well.

raybe

6

General Discussion / Just wanted to say hello

« on: June 21, 2016, 02:16:07 pm »

Sorry I haven't been present on the forum lately. Wanted to say hello to everyone and hopefully I will be able to add to the forum again.

All my best wishes and so happy to see the core of members are keeping the forum current and continue to help everyone when possible, great job, thanks.

raybe

7

General Discussion / Some News is Better than No News

« on: March 01, 2016, 04:55:15 pm »

Just wanted to mention and I'm sure that others have also noticed, since Robert's little update that some old friends are hinting a big come-back. Even aladyblond has a mention which I think is great.

I guess a little news is better than no news and it certainly seems to have brought back some attention. I'm sure Robert M. has taken notice. If not maybe when he and his wife get some real sleep at night.

Hoping the best for all of this positive interest and new additions. (I meant family as well).

raybe

Hope all is well with everyone.
Talk to you soon ART.

8

Ultra Hal 7.0 / New topic taking on the challenge Robert M

« on: January 17, 2016, 01:14:06 pm »

Just a follow up for a response. Robert M. any suggestions on how you would wish to proceed or not. I'll say it again I understand things are hectic but if there was just a hint it would be helpful.

Any one please feel free to relay any messages to Robert M. Just want to know the possibilities based on a set of real criteria. If not possible that is fine. Circumstances are always changing and evolving. Sometimes it's just the timing.

Thank you again for your time,

Ray B.

9

General Discussion / OTCE dO YOU HAVE A MOMENT

« on: January 17, 2016, 12:54:32 pm »

Just needed to post here. I believe at some point I had your email address or alternate way to contact you. I would like to discuss a topic with you, in any way that you would feel comfortable. I would like to have a private conversation. Maybe Art, Carl, Dusky or Lightspeed have a better means. I apologize to everyone for this post but it was the only way at the moment. If your still on line you can just let me know if you do not wish to contacted at this time.

I appreciate your time either way and again my apologies to the forum,

raybe

10

Ultra Hal 7.0 / Windows 10 & Ultra Hal License

« on: August 07, 2015, 06:26:16 pm »

Has anyone experience with the Windows 10 update the License to use Ultra Hal can have a problem re-registering?

My system is personally working but I did encounter a problem during an update on one of my computers. I did not deactivate the license prior to install on any updates which totals 3 different computers.

Thanks,
raybe

11

Share Conversations, Experiences, Graphics / Set-up Different Default Poses or Locations inside GUI Window

« on: May 04, 2015, 08:22:17 pm »

Thank you Carl, Dusky and Art,

Art can you please make sure that the terminology is correct for UltraHal standards.(Probably very similar for other products as well) You might as well start with me. I remember you mentioning it and I thought it was a good idea so everyone could be on at least the similar page when describing different ideas or problems. Thanks. Anyone else feel free to correct me.

My problem has been having my character upon start-up default to a different pose and or different location within the GUI Window, of coarse this would mean work with most backgrounds and the particular GUI you are using.

We can do it manually but I thought it would be nice if we can set different defaults for the same character. I don't know if you would also have to contend with the default locations that are within the Haptek characters.
Usually heads or full body characters find just about center of GUI window on start-up. But with certain backgrounds or GUI maybe you would want to have the character default to a sitting position or facing a little left or right, back or really close to window.

Thank you Carl for your response from other thread and Dusky thank you for your direct response(will send what I have). Hopefully this makes sense to everyone.

If not feel free to respond. I figured, why not work with what we have while waiting on any update right now. I know it might be a waste, but it may just play into things later, who knows.

raybe

12

Ultra Hal 7.0 / ZABAWARE Responds from "Nobody wants to say it

« on: February 19, 2015, 05:02:25 pm »

Okay then, for the sake of just saying it and I do know the history so I don't need to be reminded by anyone. Unless of coarse you know something I don't. Then I apologize for this entire subject and feel free to remove, I'll keep my mouth closed with a sorry.

 Mr. Robert M. what is happening with any progression of UltraHal if any ?

Please post anything good or bad. We still love what you have created and for others really tried to make additional tools. But a direction is better then no direction at this stage.

 Just my personnel opinion is, you should address it no matter of the situations. Why? Just for the sake of long time relationships that have also been built into your UltraHal. We are all friends here. (most any way)lol. Heck this is your forum.

I think it would be nice for everyone.

Thank you,
raybe

13

General Discussion / Raspberry Pi 2 Goes Quad Core

« on: February 14, 2015, 04:02:57 pm »

Has anyone experimented with the Raspberry Pi2 project board? An inexpensive and exciting way to work on a budget, powerful fully functional fit in your hand computer. Haven't purchased one yet but for $35.00 a great way to start any project. For UltraHal possibly and home automation or both.

Any feedback would be appreciated.

raybe

14

General Discussion / Radio Shack

« on: February 05, 2015, 10:54:33 am »

Dear Art would love to discuss the difference between the older Radio Shack history and what they really did in the past. Don't get so impressed by College degrees. It is still the individual and experiences outside the classroom. The employees I have spoken to at many Radio Shack locations have schooling but no real experience. Radio Shack was good for project builds in electronics and carried an extensive supply of parts for novice to pro applications and the personnel to build these projects. Today, great at selling toys, radios and I phone accessories but like many don't get paid enough. As told by others. But I guess this really doesn't matter since their filling for bankruptcy or just selling out.

Just so there is no mis-understanding I am not knocking education or any one that works at Radio Shack today. But things have and do change including Radio Shacks direction in business and electronics. I will miss them if they completely shut down.

Hope you don't mind the reply. Worked with Radio Shack for many years and was able to see the major transformation. We built many things for use in the Pro Audio field for years and Radio Shack was a decent suppliers of electronic parts.
Just conversation thanks, ART. Always enjoyable.

raybe

15

Ultra Hal 7.0 / Avatar Placement

« on: January 31, 2015, 03:26:56 pm »

Does anyone remeber where the positioning of Avatars happen upon start-up? I know the movements after start-up but I would like my Avatar to be in a different position on the screen upon start-up. Just can't remember.
Thanks,
raybe