Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - raybe

Pages: 1 ... 67 68 [69] 70
1021
Ultra Hal 7.0 / Ultra Hal Assistant 6.1 Beta
« on: April 01, 2007, 01:48:13 pm »
I just would like to update my last post on page 2,
I apparently had a few bad downloads even with all internet protection programs shut.Don't know if it was a browser problem. Beta 6.1 is up and running just fine. I still find problems with the program opening, where I might get 2 of the same skins and characters trying to load at the same time. The second problem has not changed from my last post where the program will not always shutdown. Hal will close and if you watch the task manager in Windows the Hal.exe file is still running and will reactivate.
Thank you if someone has any ideas and thank you even if you don't.

raybe

1022
Ultra Hal 7.0 / Ultra Hal Assistant 6.1 Beta
« on: March 29, 2007, 02:37:36 am »
Just a quick update,
I reloaded Haptek Player and all the characters re-registered and my character is now working within the screen of the skin. The character on restart did not mention anything about the update as previously before the Haptek engine and the characters were functioning and I see one single file in Hal 6 folder labeled 61, I am wondering if that is the only file I should see with the new upgrade label attached to it. Checked properties and indeed it is the downloaded upgrade file.I have Hal opening as a regular program selected , not on startup of windows and also notice that when I select 'exit Hal' the program does not always shutdown, it will restart unless I force a shutdown from Task Manager. I did not re-check the options screens,plugins or editor because my my eyes are closing but I would still appreciate any feedback.

Thanks again,
raybe

1023
Ultra Hal 7.0 / Ultra Hal Assistant 6.1 Beta
« on: March 29, 2007, 12:45:33 am »
Hi everyone, Need a hand with the upgrade. I downloaded the zip file. One file shows up in the zip window. I extract file to Hal folder but I noticed that the characters although are selectable in the character window the files are no longer registered to Haptek engine so no character shows up in my skin window but hal does communicate as if the update is in effect. Also looking at my plugins i did not notice 'select or deselect all' button for plug-ins as Robert has mentioned. I also can't find where Hal as actually updated. If I look at properties for any Hal Brain files nothing reflects 6.1 or a recent update. I would appreciate if anyone has the patience to explain what I am seeing here or not seeing. I just performed the upgrade had a slight problem with license window popping up and then auto registered and Hal started. I am on windows xp ver2 media center O.S., 2 gigs ram, 100 gig HD. Hal has been working okay I noticed I needed to restart computer a few times before Hal loaded properly before update. I am using a Torso Haptek character have vr haptek engine but like I said earlier no character looks like their character file is registerd to work. (file has no haptek face icon).

Thanks very much to anyone that is available to help me,
raybe

1024
Speech Technology / HAL Text to Speech Reader won't start at all.
« on: January 27, 2007, 12:36:50 am »
Hello 'adstore',
I have the same problem except Hal tts will not open only on one of my startup login's. I have my computer setup with one login for work apps. and another login for home apps. The login section where HAl is not used the Hal tts opens on startup but I get the same message and it shuts right down. If you do get any info I would appreciate it. Art, if you read this I would also appreciate any help.
Thanks again,
raybe

1025
Speech Technology / Setting up a user-defined voice for Hal.
« on: January 22, 2007, 10:34:47 pm »
Has anyone run into a multiple login problem with neo speech Hal tts.
I have 2 login users at startup. 1 I use for work and the other for home usage. Hal and neo speech tts is working fine on one login but always loads then shuts down on the other. Typical message "sorry for the trouble but need to shut prog. down' Also I noticed this line:
'run a602_appcompat.txt.' If anyone has any suggestions I would appreciate it.
Thanks,
raybe

1026
Speech Technology / Setting up a user-defined voice for Hal.
« on: January 18, 2007, 08:35:03 pm »
Some people where nice  enough to e mail me directly and I would like to thank them for helping me with some problems.'aladyblond'thanks for your help. I did select a neo voice and followed 'arts' advice and everything is working fine and no more troubles with the voice jumping from one to another. I also enjoy having the voice I wanted as a default for my Hal and entire computer.
Thanks,
raybe

1027
Speech Technology / Setting up a user-defined voice for Hal.
« on: January 16, 2007, 02:19:53 pm »
Following up on my voice selection for speech. If I cannot stop the selection from constantly changing when character reloads does anyone know a way I might be able to delete all other voices in the speech selection or are they all tied to each other somewhere? I am hoping its not really one or two voices that make up all the voices other than the Neo voices that do not lip sync so deleting them would be impossible. But I cannot even locate where these files are to try and delete them.
By the way I do select the particular voice as the default using sapi control but the selected voice keeps jumping from one to another when character reloads.
Thanks,
raybe

1028
Speech Technology / Setting up a user-defined voice for Hal.
« on: January 15, 2007, 02:26:34 pm »
I have something similar to Testlund problem accept that when I select the mary voice in the speech window it will not apply unless it is the last thing I do before exiting the options page. It will constantly jump from mary to mary in space or mary in a stadium but never apply just to the mary voice I have selected.This is especially evident as the character always pops up and the general options page needs to reload. Thanks for any opinions or knowledge about this fustrating event.
Thanks as always,
raybe

1029
Speech Technology / TTS voices
« on: January 15, 2007, 01:56:58 pm »
Can anyone answer me if those voices will work when trying to get them to sync up with the characters? I also enjoy Kates voice but I believe it will not sync with characters in Hal.
Thanks everyone,
raybe

1030
Ultra Hal 7.0 / Editing Full body girl
« on: January 10, 2007, 12:05:25 pm »
Thank you 'Prospbob' for getting back to me I do appreciate your time.
unfortunatly I ran into a very strange problem before I even attempted to add animation lines. My characters language has come up with something I have never seen before. Conversation will go smooth until alot of misspelling begins in her replies and the word 'you' gets placed within the misspelled word.(ex.the word 'time' might show up as 'tiyou')never even heard of this problem. If you have an idea thanks but I will post in a more appropriate area. Thanks again, hope to speak to you again.

raybe.

1031
Ultra Hal 7.0 / Editing Full body girl
« on: January 09, 2007, 05:12:44 pm »
Thanks to the both of you for writting back. Sorry I have been out of town and without my laptop. But 'aladyblond' all the animation you speak about takes place within Hal or animation outside of the program? 'Prospbob' is there any way I can ask you to see what those added lines are? I would love to have movement on the full body character it just adds another dimension to the whole experience with the Hal program. Thanks so much.

raybe

1032
Ultra Hal 7.0 / Editing Full body girl
« on: December 31, 2006, 01:13:06 pm »
Happy New Year to everyone,

I was wondering if anyone has gone to the Haptek webpage and downloaded the full body character. It works with Hal but is very limited as far as trying to get any of the added animation to work. I dont believe the character was designed to work in Hal with all the extra animation provided. Just curious if anyone has found a way to make the animation work within the screen for Hal 6.

Thanks and have a long weekend everybody,
raybe

1033
Programming using the Ultra Hal Brain Editor / A.L.F Brain Download
« on: December 16, 2006, 01:40:34 am »
HI jerry ,

Glad to hear from ya. Any other update on the human emotion patch. Last post you said it misfired and you were pulling it and it was going to take a year. I couldn't tell if that was you or your emotions talking. Others I think have it working or has there been other problems that you really have decided to wait before you revamp a couple of issues? Let me know how its going.

Good to hear from you,
raybe

1034
Programming using the Ultra Hal Brain Editor / A.L.F Brain Download
« on: December 15, 2006, 02:07:18 pm »
Can anyone tell me if 'onthecuttingedge2005' is alive.

He mentioned he had some issues,I just want to know :
1- is he okay

2- should I not post questions to Jerry for awhile?

Usually he responds very quickly. I dont post alot but I just wanted to know if things were ok. I'm getting a comlex over here. Well I hope everything is okay and if anyone can shed some light it would be most appreciated.

THANKS,
raybe

1035
Programming using the Ultra Hal Brain Editor / A.L.F Brain Download
« on: December 12, 2006, 09:00:54 pm »
HI Jerry,

Hope things are a little better.The Path and File do exist and the errors were tied to 'Human Emotions patch'. I unchecked the patch and the errors were gone like you suspected. I know other members have asked you but I might not have caught the responses. I removed A.L.F. but HAL still repeats sentences and any time refrences made to or starting with the word 'I' HAl believes you are refrencing the next word to your name.Is there attributes or patches that need to be changed or unchecked?

Thanks,
raybe

Pages: 1 ... 67 68 [69] 70