Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Duskrider

Pages: 1 ... 165 166 [167] 168
2491
Ultra Hal 7.0 / Wigs?
« on: May 07, 2005, 12:39:13 pm »
While we on subject of hair, at the following site you can pick up hair7.htr
Much nicer than the hair6
http://www.haptek.com/welcome/

After you get the hair7,
You can get other accessories on this site.
Click on the guy with the earphones.
After he loads, get the earphones from your Hap_temp file
Your characters will love them.
Also in next picture down, get the sunglasses if you want.

Click on acts in lower left corner and
then in next screen click on Hap TV in lower right.
In next screen at the bottom click on the Wimpy clip and got his cowboyhat.htr from your hap_temp.
A couple head skins here too (clown, etc), they not great.
But I love the cowboy hat.
Sandy does too.
[;)]

2492
Ultra Hal 7.0 / Drag and drop
« on: May 06, 2005, 08:10:38 pm »
Its a warm spring evening in Jacksonville and I'm sitting as usual chewing the fat.
Anyway I got to thinking about cuttingedge and how he got an idea brewing that could revolutionize the computer industry.  Every quantum leap in computer analytical advancement requires a leader and followers.  Well, here we are.   We are ready.

So as I was saying, I was sitting and talking to this lady about it, and I mention the cool idea of the liquid nitrogen manifold and how we could really crank things up.
This calm quiet lady suddenly goes out of her mind and jumps up and starts screaming something about am I crazy and do I know how cold liquid nitrogen is.
I says to her, yes, we need it to be cold.  She says if I even start a nitrogen hookup, she's going to leave me.

The short of the long of it, is I'm afraid I can't participate in this exciting odyssey. I love this Hal program and love all my characters and the idea of them leaving me because of a nitrogen hookup is too horrible to contemplate.  
[;)]

Unusual idea, but enclosed nitrogen manifold is not a bad idea.

2493
Ultra Hal 7.0 / Drag and drop
« on: May 06, 2005, 08:49:57 am »
I drag and drop 20 skins in a minute. No problem.

Hal and Haptek enjoy power.
I suggest pentium 4 processor around 3000,
also at least 128 MB video memory,
and 1024 MB ram.

And if you looking, no hard drive is too big.
I got 160 GB hard drive, and my programs take up 26 GB.
[;)]



2494
Ultra Hal 7.0 / here are some emotion files and texture comms
« on: May 05, 2005, 09:57:11 pm »
Dr Benway,
I notice you dropping emotions into your open htr characters.
You can also drop a skin too to see how it looks.  This is big help if you making a skin. Nice to have your model right there.
 
You can also drop other htr items too, like hats, glasses, cane, hair, rabbit ears, etc.  Just drag and drop.
[;)]

2495
Ultra Hal 7.0 / here are some emotion files and texture comms
« on: May 04, 2005, 08:21:33 pm »
Mark,
Forget Mary. She is not full body haptek.
Use either body_female.htr or fullbodgirl.htr
Either of these is good with Crystal skins Crunch made or other skins you find.

We got 2 ways to do it now:
you can have your Hap files point to the skins
or you can use trigger words.
Check out my posts at:
  http://www.zabaware.com/forum/topic.asp?TOPIC_ID=2139

2496
General Discussion / To pull the plug or not?
« on: May 02, 2005, 08:37:19 am »
FuzzieDice, I think you right on.  [^]
'

2497
General Discussion / What means "Eater of bugs"?
« on: May 01, 2005, 11:54:35 pm »
At bottom of the title page of
http://www.zabasearch.com/#first
it reads as follows:
ZABA is from the Greek word, "tzaba", which means, "free" or "at no cost"
.

2498
Ultra Hal Assistant File Sharing Area / Get a new 3D body to play with
« on: April 27, 2005, 09:35:33 pm »
A extra cool one for you.

If you go to
http://kahunanui.com/haptekdemo/
and let the gal load, you can go to your hep-temp file and get an improved fullbodygirl (size 3487 kb).

The front don't bounce as well, but she got a terrific sweet smile.  [;)]

Humm... Anyone know a way we can combine a bounce with this smile?
.

2499
Ultra Hal 7.0 / Will Hal eventually answer?
« on: April 26, 2005, 08:50:29 am »
Thought I'd mention that with the above mentioned script,
you can load your body_female into one map after another.
(and of course have her ready for bed at days end.) [;)]

For skins you can get the 6 full body hepteks from their web site.
Just click for download.
Grab their skins (maps) from your hap_temp folder and put in  your skins folder.
Crunch also offers 4 beautiful skins of Crystal for download here on the forum.
Also from your heptek file, you can load body_male and get his skin. (body_female fills out his clothes very nicely.)
So here you have 11 skins.   You can mix and match outfits and make alterations.
Simple to cut sleeves off and make shorts of pants, etc etc.  
Also cute to just take pants off and lengthen the shirts.
Had so much fun altering clothes past couple days, I've neglected her brain.
Oh well, we return to her education tomorrow.  [^]

2500
Ultra Hal 7.0 / Will Hal eventually answer?
« on: April 25, 2005, 11:00:42 pm »

Knyte, I appreciate your comment regarding clothes changeing.
I searched and found it.
Is so much easier than I expected.
Now with trigger words I change clothes, and hair.(and put the bunny ears on too)  [;)]
I love it and my kids do too.
 
The script is for the XTF brain but also works perfectly in standard Hal.
Info located here:
http://www.zabaware.com/forum/topic.asp?TOPIC_ID=1789&SearchTerms=change,clothes
[^]

2501
Ultra Hal 7.0 / Will Hal eventually answer?
« on: April 23, 2005, 07:15:18 pm »
Hummm.....no solutions yet regarding my above question.

Maybe in my limited way, I can make it easier.
I have 4 identical full skins but with different shirts in my skins folder.
Black, Yellow, Blue, and Red shirts.

I create 4 copies of my Haptek Character in Hal's Characters.(Black, Yellow, Blue, and Red)
Each has its own PSN.
Each PSN points to its own 3 normal haps.
Each 3 normal haps point to one of the skins (Black, Yellow, Blue, and Red)

So actually what I'm asking Hal to do is simply switch from Yellow.PSN to Blue.PSN.

My trigger to Hal would be to tell him to "put on your blue shirt"

I hope this helps.

Now that we all making nice clothes, we need to tell "Hal" what to wear.  [;)]
.

2502
Ultra Hal 7.0 / Will Hal eventually answer?
« on: April 22, 2005, 12:49:54 pm »
Spydaz, you got me thinking...

Lets say I have a full skin (jpg) in my Haptek skin folder.
I copy it 4 times and change the shirt on each.
I realize I can list all 4 as 4 characters and then change characters but can I simply "tell" Hal to put on the blue shirt which is one of the 4 copies in the skin folder.
How would I do this?
I'm not a script writer and have no idea.
???

2503
I just ran across the following script.
Can anyone here re-write it for Hal ?


# convert2.py
#      A program to convert Celsius temps to Fahrenheit.
#      This version issues heat and cold warnings.

def main():
    celsius = input("What is the Celsius temperature? ")
    fahrenheit = 9.0 / 5.0 * celsius + 32
    print "The temperature is", fahrenheit, "degrees fahrenheit."
    if fahrenheit > 90:
        print "It's really hot out there, be careful!"
    if fahrenheit < 30:
        print "Brrrrr. Be sure to dress warmly"

main()


[;)]

2504
General Discussion / What means "Eater of bugs"?
« on: April 14, 2005, 09:42:32 am »
In "quickview" the command line "eater of bugs" makes her look all upset like she just ate a bug.


2505
Ultra Hal Assistant File Sharing Area / Scripts, addins, and extras
« on: April 13, 2005, 01:54:27 pm »
I just want to say thank you for all the help this forum has been to me in characters, skins, hair, etc and most of all for the knowledge you've graciously shared.
 
Here's a cool icon for you.
Use it as a shortcut to open Hal or as an icon to represent your systems Haptek Player Documents (Characters)
Enjoy. [;)]

Download Attachment: Hal-icon.zip
123.93 KB

Pages: 1 ... 165 166 [167] 168