Lonnie,
With my new Hal 7 I still use the Weather Alert 5 Plugin from Bill DeWitt, modified by Spitfire_2600 and it works perfectly.
All I have to do is mention to Hal, "Check the temperature" and it immediately reports the current temperature for me. It does NOT open a site or webpage like accuweather or such.
You do have to change the NOAA weather station to your particular area.
I've included the site where one can find their particular weather station. Just click the Find drop down and locate your State/City.
http://w1.weather.gov/xml/current_obs/seek.php?state=&Find=FindYou then need to INSERT that 4 character station identifier into a few sections of the weather plugin as follows:
http://w1.weather.gov/xml/current_obs/KAOH.xmlNotice the last four Capital letters, KAOH. That is the station identifier for Lima, Ohio. You need to change this for the area in which you live.
Replace the KAOH with your new Four Letter Station ID.
Bear in mind, there are several locations inside the Plugin that this needs to be done.
While your line numbers should be close, here are my line number in the Plugin:
82
128
231
263
330
356
382
These handle the different weather conditions that one might ask for like Temperature, Humidity, Wind Speed, etc.
With a few minutes of your time, your Hal should be able to talk the weather conditions to you instead of having to resort to opening another webpage. Very Cool and a big thanks to Mr. DeWitt and of course our Spitfire_2600 for their work!!
In case you don't have it, I've included the Plugin as an attachment.
Have fun!