Zabaware Support Forums

Zabaware Forums => Share Conversations, Experiences, Graphics => Topic started by: jackgephart on November 15, 2015, 06:34:13 pm

Title: Help I need Help
Post by: jackgephart on November 15, 2015, 06:34:13 pm
I need some help putting her together, it's one of my best skins I just need her in people putty. Can anyone help me?
Title: Re: Help I need Help
Post by: systemshock on November 16, 2015, 04:42:50 am
Just wanted to say lovely  work there..saddy   i n  don't  have  people putty  so  i  don't  know how to  put it in there
e...
Title: Re: Help I need Help
Post by: Duskrider on November 16, 2015, 08:07:05 am

You could take the marta head that you have and drop the top pic on her.
   
Title: Re: Help I need Help
Post by: Art on November 16, 2015, 08:10:45 am
Jack,

My people Putty basically quit working ever since I switched over to Windows 7 a couple years back.

The player still works (even better if one uses the Car.exe program (allows one to select how many cores your processor uses).

Wish I could help.
Title: Re: Help I need Help
Post by: jackgephart on November 17, 2015, 05:16:09 am
Dusky,

 I did and I got a pretty little girl. But the beautiful eyes don't show up as much.
Title: Re: Help I need Help
Post by: lightspeed on November 17, 2015, 09:36:13 am

jackgephart you say you need her in people putty , i don't understand, she looks like she has been made in people putty as a skin , what exactly are you wanting an htr head? sometimes i am denser then most materials lol ! ;)
Title: Re: Help I need Help
Post by: jackgephart on November 17, 2015, 03:25:28 pm
Lightspeed,

 I am wanting the Face Shot skin to be put into People Putty so that the hair and shirt will stay on her. That at the top of the thread is the regular Haptek Player Face. My computer is put away in storage or I would do it. I am not doing to much with it, but just for fun I tried a face and it turned out really good. The other face down lower was a Haptar that Dusky sent me, and I put on the Face Shot. So nothing is done with putty yet.
Title: Re: Help I need Help
Post by: Art on November 17, 2015, 07:44:50 pm
OK Jack! NOW I know why you didn't answer my email! (computer is sleeping for a while).

I thought it was something I said! Hehe!!

Glad to see you around these parts!

 ;)
Title: Re: Help I need Help
Post by: jackgephart on November 19, 2015, 02:47:32 pm
Art I answered your email, but now here is another problem...

 I made a perfect Adam Sandler skin and I have nothing to putty him with.
Title: Help I need Help
Post by: PassionTriak on November 28, 2016, 03:39:01 pm
Ok well can u add bones to models already made? Cause I got a bunch of models they need bones. An Im lost. I have fragmotion but Icant figure out how to add bones. I need serious help lol
Title: Re: Help I need Help
Post by: Art on November 29, 2016, 05:51:55 am
PassionTriak,  People Putty was used to create various heads including hair, gender, emotions, accessories, glasses, scars, beards, etc. It was just a 3D head as UltraHal did not originally use anything but the head and possibly head & shoulder characters. People Putty was released for use with Zabaware's UltraHal Assistant software. Hal was able to load and animate a 3D head while conversing with the user.

While People Putty did have some Full Body characters, they were not specifically designed nor used for / in the UltraHal program. Some clever users found ways to get them to work in the Hal program. Those full body characters had their own "bones" system that allowed movement. No other 3D character software would / will work other than Haptek's People Putty. It sort of went by the way side after XP.

Your models will not work with UltraHal.
Title: Re: Help I need Help
Post by: doonycram@gmail.com on December 24, 2016, 12:01:32 am
will putty work with daz3d or poser
Title: Re: Help I need Help
Post by: Art on December 24, 2016, 08:15:55 am
No...People Putty was a really nice, stand alone program that enabled one to easily create 3D avatars / Characters for use with the UltraHal software and other Haptek programs.

Sadly, it has not been upgraded since Windows XP and it does not appear to be supported any longer by Haptek.

Title: Re: Help I need Help
Post by: lightspeed on December 24, 2016, 03:48:41 pm
Hello all, Art , actually i was just recently talking with ted about something like this , except what i talked about was using a skin or creating a skin from daze three etc. better looking models and creating a skin that will be a drop skin on full body haptek bodies !  But that being the case if a person has the better daze 3 or whatever characters depending on what software is used to try to create different views of the body , front, sides and back and the editing software to create a skin(ted knows what i am talking about).  ;) a nicer skin could be made to fit on the existing full body character .
Title: Re: Help I need Help
Post by: Art on December 25, 2016, 07:54:10 am
Sure...people have done that with a lot of "Drop-on" images in the past. One guy bumped up the resolution in his graphic program then saved the result to fit Hal's normal image dimensions. The detail was way better than the normal faces we used to see with Haptek.

It just takes some time to make sure the alignment is correct for each component of the "unrolled" face.

And Merry Christmas!! ;)
Title: Re: Help I need Help
Post by: cyberjedi on December 28, 2016, 03:58:58 pm
Theres ton s of this stuff at the repository. mix heads with skins.  Plus even more at the private repository







cyberjedi
Title: Re: Help I need Help
Post by: Art on December 29, 2016, 12:06:42 am
Yeah, it would seem that there has been quite a confusion of terms with regard to skins.

The Character "Skins" are the graphical representation of either a character's head/face or a FullBody character's head/face/body (usually with a variety of clothing).

There are GUI (Graphical User Interface) "Skins" that define UltraHal's "World", the Character, text Input and Output windows, a couple of buttons for access back the the Main Menu and one to activate the Mic for use with Speech Recognition, and usually a border to enclose everything.

There have been a considerable amount of GUI skins that are available and relatively easy to create with a bit of study.

There are the Skins for faces that need to be loaded or rather Dragged and Dropped onto Hal's head every time Hal is run. A person can also drop a different head image onto it , then another and another watching it change each time. All is lost whenever Hal is shut down.

In order to have a unique character, one had to design / create a head in a program called People Putty from Haptek, Inc. A character was then saved with an .htr extension and it could then be loaded into UltraHal as the person's default character with a unique name, hair and clothing.

Most .htr's can accept other image files (.jpg) or heads or characters dropped onto them unless the .htr character is not a human proportioned head. (People Putty could create various shaped creatures and animals as well as human morphed characters).

Optional items like accessories could also be added within the People Putty program like beards, moustaches, hats, hair, scars, makeup, colors, etc.

A small book could easily be written detailing all the possibilities one could do with People Putty & UltraHal plus the accessories, skins, GUI skins, .jpg image heads and full bodies and all the head and fullbody .htr character files. Yes, it could fill a book, but that is not my intent here.

I'm just trying to shed a bit of light for some of our newer members in case they get confused by some of the lingo here.

Have fun, no matter what.... ;)
Title: Re: Help I need Help
Post by: malika on February 03, 2017, 04:10:39 am
Dusky,

 I did and I found the guide to help me get phenq (https://thefecaltransplantfoundation.org/where-to-buy-phenq-the-ultimate-guide/) at best price got a pretty little girl. But the beautiful eyes don't show up as much.

Can I edit it? If you allow me?
Title: Re: Help I need Help
Post by: cyberjedi on February 10, 2017, 11:55:48 am
Im about to show u guys whats up here, quit playing with animated looking chars and go real textures.

i did this in 30 min with paint shop pro
Im working on a process that will do this, please forgive, i had 30 mins

srry waas a mug shot,
Female voice too,lol .. ugly ass bitch. lol
But my Mini-Me is reading the Davinci Code. Entirely, had to shut her up after 2 hrs


https://www.youtube.com/watch?v=wYQPVaF0mU4
best wishes
cyberjedi