Zabaware Support Forums
Zabaware Forums => General Discussion => Topic started by: lightspeed on April 09, 2014, 06:31:42 pm
-
I know people have mentioned before that haptek is very bad about support , i had wrote them a letter before a while ago that after i installed my paid version of people putty and also the character pack one , that it still showed the character pack wasn't working said demo only , but i could click on it and they worked , they never wrote me back so i didn't bother since it was still working , well i hadn't used my people putty for a while and when i tried to it stopped working on the people putty pack for extra hair etc. so i uninstalled it and re installed it and it says trial version way out of date etc. i put in my serial number and tried to get a code to put in by "get code " area . the web page won't come up , so i went to the off line area to get a code and did the same , it gave me a 0 code to enter when i did it still doesn't work .
so i wrote another letter and sent it to the support link to haptek if they don't bother answering this time i am going to turn it in to the attorney general , because i bought the product to use , not to have a company sit back and not answer when a person needs help and for a code to make it work . i sent them a jpg picture of both orders showing my serial number etc.
Unless anyone knows that the support link isn't working and their is another way that people have to contact them , i guess i am stuck with having to contact the attorney general . as far as i know their is no phone number to call the haptek people .
-
As Jack has stated and I have experienced, People putty does that on Windows 7. It works on XP and Vista. I don't know if it can be made to work on 7 with the Car program. The problem seems to be the multi-core thing.
-
Pp will only work on XP.
Haptek told me when win7 first came out that you can't get a serial #
Only for XP,
BUT!!! I don't think anyone is there any more.
I am sure Haptek is dead & buried. RIP????? :-\
-
I was using haptek people putty fine before on my windows 7 dual core pc . but had trouble about my pc on something else , redid it and put haptek people putty back on and it installed okay , it was the people putty pack one that i had trouble with . the car program where can i get it to try it ?
as far as the company if they was going to stop the business they should have given a permanent license to the paid users that could be used more then once on the same computer and not two computers at once . not screw over everyone . if i don't hear back from them in a week i'll still turn it over to the attorney general and see what they can do or find out!
does anyone know where i can get the "car program ?"
-
Does anyone have a link to the "CAR PROGRAM THAT WAS MENTIONED EARLIER OR WHERE I CAN GET IT??? THANKS .
-
Lonnie,
You can easily set the number of Cores used by going here:
http://www.sevenforums.com/tutorials/66504-processors-limit-number-used-windows-7-a.html (http://www.sevenforums.com/tutorials/66504-processors-limit-number-used-windows-7-a.html)
;)
-
Lightspeed, you can get it from my Dropbox.
Here.......https://dl.dropboxusercontent.com/u/84848023/car.exe (https://dl.dropboxusercontent.com/u/84848023/car.exe)
Art, interesting find but i think it sets all programs to run on whatever setting you set??
Some might not run properly set to only 1 core.
Where as Car sets each program.
-
Oh yeah...I know that the UltraHal program automatically sets it's desired number of cores when the program starts.
The Haptek Player runs better when cores are set but the Haptek program itself, simply does not work on Windows 7.
Thanks for the dropbox posting! ;)
(wonder how many people will screw up their computers by messing with the core settings!)?
<there's always default>
-
Art and Nige thanks to both of you for answering , i'll try thr car program , if that doesn't work i'll spit in the back of my pc and watch the fireworks early lol!
By the way any tips on exactly how to do the settings in the car program ?
-
hi for anyone using hapteck people putty , i am having this problem and wondered if anyone else is i open the installed people putty put in my serial number (it already has my pc id number ) then hit get code and this window pops up window can't be displayed unsecure certificate etc. (see attached picture ) any idea's around this or what may be causing the problem ? i sent an e mail to haptek support . just today .
i want to try to get back into making more characters .
i saw how to do the car exe . program and set it on one core . of course i won't know how it will do until i can get past trying to get my unlock code in people putty . i wish someone , Robert etc, had another program we could use our characters with .
anyway any help or suggestions on this would sure be appreciated .
could this be a matter of a pc setting about not opening the window and if so where could i check to allow it .
-
Lonnie,
I'm sure this has been a sore spot for a lot of people and t keeps coming up but the problem you and I and others are having is that we are using Window 7 or 8 and NOT XP, otherwise your original license info should work.
I've received emails from Jack that offered to help but then as soon as I mentioned Windows 7, he apologized and offered no remedy for Haptek's lack of compliance with Windows 7 / 8 and didn't see any solution in the immediate future. Looks as though Haptek is still dead in the water.
Run it on an XP machine then copy your custom characters (htr files) to your Win 7 / 8 machine. From there, you can copy them to your Hal folder and use them with the UltraHal software.
OR...we can search for something better in the mean time....
-
hi Art , actually I don't mean to contradict you but the people putty did work okay in windows seven (maybe it isn't suppose to but I used it for a while and it worked just fine , I don't know what changed ( I think I even mentioned on the forum that mine worked just fine when other people were saying they was having problems ) .
The problem is though is that the person running haptek or support isn't even writing back anything I have sent three letters now , ( I am able to see my mail now and their has only been an automated letter from them the last one said if I need further assistance to reply back and so I did saying I needed further assistance .
I sent them the requested information showing where I bought the product with my name serial number etc all on it .
I had thought about doing what you said about putting hal on my xp as I have one , I can set it right beside my windows seven , but the trouble still is that I need to get them to actually respond back to me to be able to even tell them I have another computer to the id number will be different .
DOES ANYONE HAVE THEIR ACTUAL E MAIL ADDDRESS ??? since I can't get them to respond by e mail maybe I can try writing them and sending proof of my receipts etc.
WELL THEY ANSWERED BACK WITH THIS NEW LETTER SO I GUESS I'LL SEND THIS TO THEM NOW .
Web Help
To Me
Apr 13 at 11:36 PM
Dear Lonnie Hensley,
Thank you for contacting the online store.
We apologize for the inconvenience. Unfortunately, we are unable to
assist you with this issue at the online store.
Please contact customer support at:
http://www.haptek.com/support/faq/
support@haptek.com
Sincerely,
Maureen C.
online store
Customer Service
webhelp.v4@digitalriver.com
Email ID: 27883874
Original Message Follows:
------------------------
I need further assistance I need a new unlock code I sent all the
information needed proof of my order etc. please send me a new unlock
code as soon as possible .
thanks ,
Lonnie Hensley
--------------------------------------------
On Sat, 4/12/14, Web Help <webhelp.v4@digitalriver.com> wrote:
Subject: Re: PEOPLE PUTTY UNLOCK CODE PROBLEM (KMM54088941I11273L0KM)
To: "lonnie hensley" <airvair62@yahoo.com>
Date: Saturday, April 12, 2014, 1:49 PM
**This is an automated response.**
Thank you for contacting the Online Store Customer Service
Center.
If you require the assistance of our Customer Support Team
representatives, please review the below information so that
we can help
you with your question(s) as fast as possible.
If you have DOWNLOAD, BILLING AND/OR SHIPPING QUESTIONS, you
can visit
our Customer Support at:
http://www.findmyorder.com/cs
Here, you can find information to assist you with the
following tasks:
- Download a digital
order
- Check the shipping
status of a physical order
- View and print an
invoice
- Get answers to common
questions
If you still need to contact our Customer Service Team via
email, please
reply to this email.
If you have questions regarding technical support or product
installation, please review your order confirmation message
for the
appropriate technical support contact information. Technical
Support
should be able to assist with any of the following:
- Questions on
installation
- Troubleshooting
software
- Help with
features
- General questions
regarding the product
Thank you for contacting the Online Store Customer Service
Center.
Sincerely,
Online Store
Customer Service Center
Email ID 27883874
-
I also am getting this in the window that opens from haptek when I try to get a unlock code :
Content was blocked because it was not signed by a valid security certificate.
For more information, see “About Certificate Errors” in Internet Explorer Help.
and also "
There is a problem with this website’s security certificate.
The security certificate presented by this website is not secure.
Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
We recommend that you close this webpage and do not continue to this website.
Recommended iconClick here to close this webpage.
Not recommended iconContinue to this website (not recommended).
More information More information
If you arrived at this page by clicking a link, check the website address in the address bar to be sure that it is the address you were expecting.
When going to a website with an address such as https://example.com, try adding the 'www' to the address, https://www.example.com.
For more information, see "Certificate Errors" in Internet Explorer Help.
I may try to wipe everything off my pc set it back to factory defaults and put hal etc. all back on it .
-
I believe some of the problem is in my computer it's self , I hooked up my xp and with google went to yahoo mail and signed in and it showed the mail just fine , but on my windows 7 I try the same thing and it gives a blank screen after I sign in to my yahoo mail . I tried uninstalling inetnet explorer and also google chrome restarted the pc and reinstalled them and still get the same problem so something in my pc is causing this .
anyway I am going to back stuff up and wipe everything off my pc and reinstall everything .
I think this is also why I am also getting the screen error on the people putty , in the xp it opened just fine to their web page (opening a web page shouldn't have anything to do with the os . and it worked fine before even with windows 7 .
so I believe its something messed up in my pc it's self .
so now all the fun begins of backing up important things on a re writable dvd disk . >:(
-
That's no fun. I hope you get it all sorted out!
-
I found out something strange on my computer when I copy and paste the serial their is a place where it has a lower case i but it doesn't show up as a lower case even though my caps aren't on , so maybe that's part of the trouble ? )
i can type the "i" in a txt document though . very strange . the i types as a capital "i ' even when it's in lower case in the serial number box in the people putty .
-
also when i was installing it , a box popped up and said
WISE UNINSTALL
could not open INSTAL.LOG file FILE
then i clicked okay and it closed and the people putty program demo installed .
-
Interesting but does the demo run?
I imagine it might but I'd bet that you are NOT able to SAVE any creations. Right?
Does it also run Smoothly on your Windows 7 or 8 machine?
-
Art i just tried the demo the character face that explains things on the demo runs just fine but no matter what i do on the demo , it just keeps saying your demo is way way over expired or something like that , so the demo part doesn't work any more at all . it just wants you to pay for the product or get the licence and i keep going on the merry go round .
While i was trying to open another page up it gave me a page can't be displayed but something else poped up saying acrobat reader version 8 or nine needed so i am downloading it and going to run it , maybe it will straighten out the page not displaying .
I have a feeling this is my problem when i put in the code in haptek and hit the get code it opens a page saying navigation canceled etc. , i think this is what is stoping the code from being unlocked and accepted, i'll see what this download does .
The only problem i ever had running people putty in windows seven was with the hapteck player and hal , sometimes my hal character would be a little slow or jumpy like in movement , i thought maybe it was my pc bogged down , after all i run the white house and the pentigon from here to lol !
-
Hi,
i do believe that the guy whom did invent/ develop this product,,, was reachable by personal emails and does respond...
Look for his contact details on the site..
cant remeber his name off hand
-
Hi lightspeed.
it always comes down to .dll's no longer supported by the next generation of windows, try investigating dll's no longer supported in windows 7 that win XP did, it maybe a matter of just down loading one or more that is missing and registering it.
-
If that was all it took I really believe the people at Haptek would have been on to it rather than hearing about something like a .dll issue third hand.
Numerous people have tried ever since Windows 7 was released and most of us received the same info. "Sorry but we don't have a workable solution for Windows 7 at this time and we don't know if we will." (to paraphrase).
No disrespect is intended as who knows, your method just might work. If it does, do let the community know.
Thanks but I think as good as the Haptek characters were, their time has come and gone.
Good day!! :)
-
Hey if anyone find the correct answer and easy enough fix to page can't be displayed problem in haptek on windows seven , i am all ears .
i looked it up under the probem and here is what i found .
http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
of course i have found just as many other reasons on others sites to .
http://support.microsoft.com/kb/967941
-
I finally got my people putty working , "BUT" not on windows 7 .
I placed my old xp next to my windows 7 pc and hooked all wires and internet over , i then opened the people putty trial demo one and put in my password and clicked get code the haptek page opened as it should and created a code and it also put that code into people putty and i clicked okay and it was full version .
i restarted my pc and installed people pack one and it installed okay , i tested it so i know it is working right !!
It's a shame though especially since people will be getting away from xp's that haptek doesn't upgrade people putty to work with windows seven better .
although it will fall on deaf ears more then likely i am going to write them and tell them they should upgrade people putty .