Zabaware Support Forums

Zabaware Forums => Ultra Hal 7.0 => Topic started by: ulabec on January 26, 2008, 03:56:46 pm

Title: Ultra Hal 6.1
Post by: ulabec on January 26, 2008, 03:56:46 pm

Hal will not talk to me, although all voices will work when tested
I installed twice, no luck
anybody out there...?
Thanks

Title: Ultra Hal 6.1
Post by: Will and Mr Data :) :] on January 26, 2008, 07:26:57 pm

Hi from Will and Mr Data,
i was passing through and saw your post,
i'm not much of an expert and i'm sure you shall find there are experts on this forum and they are very helpful,  anyway, my first thought was,
if you have tought hal anything important
take halbrain file out of hal and save it somewhere like documents.
then uninstal hal and delete all parts of hal from pc.
down load a fresh one
replace halbrain file with yours

thats what i would do but others here might have a better course of action.
Bye for now and be well from Will and Mr Data[:D][:D]

Title: Ultra Hal 6.1
Post by: Art on January 27, 2008, 09:24:03 am

Good advice from Will.

If you give us more information we might be better able to assist.

What is your OS (98, XP, Vista)?
What voices are you trying to use (NeoSpeech, Cepstral, AT&T)?
Did you install the voices AFTER Hal was installed?
Have you tried running the HapSapiSetup?

Let us know....

Title: Ultra Hal 6.1
Post by: ulabec on January 30, 2008, 09:33:55 pm

hi, thanks for your advice and guidance

my computer is a windows 98 SE, old but reliable

the current problem is that installed voices like VW Kate (Sapi 5) which were bought and installed test ok but fail to respond when Hal is running, no lip synchronization either

I re-installed Hal several times, but no luck

Used to run earlier versions of Hal with no problem...but will try to follow your advice to the HapSapiSetUp if I can find it...

will report back on results

thanks again
Ulabec

Title: Ultra Hal 6.1
Post by: Art on January 31, 2008, 05:46:20 am

You can find it in the following folder:

C:\Program Files\Haptek\player\data\HapTTS

Title: Ultra Hal 6.1
Post by: ulabec on February 02, 2008, 03:49:27 pm

Art, thanks for you help. It works fine now.

Ulabec

Title: Ultra Hal 6.1
Post by: Art on February 02, 2008, 04:05:56 pm

Cool![8D]