Zabaware Support Forums

My lipsync within Hal is behind the words. I don't have that problem with Cyberbuddy, or Mash.

I have a Geforce 5500 video card, A soundblaster LIVE LS sound card, 1.6GHZ P$ processor, and 1 GB of RAM.

Anything I could try short of a sledgehammer, or buying a new computer?

I don't have any startup programs, except Avast Anti-virus, and Zone Alarm Free.

Mark,

Just curious, are you using Hal with a FULL SCREEN WINDOW or a very large display setting? If so, does reducing these settings make a difference?

Secondly, What TTS voice are you using (and company...Cepstral, NeoSpeech, L&H, etc.)?

I did install the latest nvidia driver, and it may have helped some. But I still think that there is a small lag in the lipsync.

Used the British English, and had the lag problem, then switched to Cepstral.

There is maybe a 1/2 delay?? Or maybe less, in the lipsync response.

On an unrelated note, I tried the people putty demo, and it kept crashing on me while recording sound. I use that to try to sync with music, but the lipsync is still laggy and often not very responsive.

I sure as heck wouldn't buy it at that rate.

Again, what screen setting are you using for your computer and Hal?

The larger your windows desktop setting (1500 X 1200, 1280 X 1024, etc) will often produce a lag, especially in games due to video card limitations, screen refresh rates, processor speed, memory, etc., as I'm sure you know. Try lowering by one step.

Secondly, in the Hal UI, try adjusting or using a smaller window size, them see if there's a marked difference in the lip sync prob.

Keep us posted....

I always use the lowest resolution, 800X600


And a smaller window size helps a little. But the slight lag is there.

markofkane,
 Just to try it I put Hal ver 5 on a P2 300mHz computer 319 MB ram, I can't recall a delay in lypsync, there was a long delay before receiving a reply as Hal was looking through the data base.  I'm using the 800x600 resolution and Mary, one of the supplied voices.
 Have you tried playing a movie?  
Carl2

 

movies play flawlessly.

Mark,

I'm running a P4 2GHz and love that British voice too, and haven't seen that happen, but my CPU is running at 50%+ with HAL, and I'd think your video card may suck down some more processing time, try looking at it's performance in the Windows Task Manager.  I've noticed a voice changer program I use cause glitching with HAL at times and I thought that may have been the problem.  I just noticed right before HAL speaks the processing goes way high when I have them all open.  I suppose searching through the code, so I thought maybe you've got lots of plug ins running also, just a thought.[xx(]

My videocard doesn't show in task manager, but Hal, or Haptek does take a lot of CPU.

I opened people putty, Hal, and that voice changer just to see what would happen.  I still didn't get the voice lag, but my CPU usage jumped to almost 90%, then it settled down to just under 80% after they all opened, not too much more and maybe I can replicate your audio problem.

(http://www.zabaware.com/forum/uploaded/danbaltzell/200672965843_CPU.GIF)

Well the lag isn't too bad, but Cepstral(I just got it recently) will sometimes get static in the voice, and eventually, there is no voice, the lips move, and the words show (In Hal) but no voice.

The voice works again if I minimize Hal, and then maximize it.

I did not have that problem with the L&H voices, or Mary, Mike or Sam.

And there is no option for Cepstal voices in any program except Hal.

I cannot get the option in MASH, or Cyber Buddy.

Mark quoted:

"Used the British English, and had the lag problem, then switched to Cepstral.
There is maybe a 1/2 delay?? Or maybe less, in the lipsync response."
*********************
Then again:

"I did not have that problem with the L&H voices, or Mary, Mike or Sam.
And there is no option for Cepstal voices in any program except Hal."
============================

OK...so which is it? You had a prob with the L&H voices or not?

By, There is no option for Cepstral Voices...what do you mean?

Cepstral has the SwiftTalker program with which to change the pitch, speed & volume.
MS agent helpers can also use the Cepstral voices.

Seems to be a bit confusing....

The lag is less noticeable with Cepstral voices, however:

Sometimes there is static in Cepstral voices, and it quits working until I minimize and maximize Hal.


BUT, Cepstral Voice only appears as an option in HAL. Not Cyberbuddy, or MASH.

I may make a recording (sometime) to demonstrate the lag I got now.

Yes, if you'll notice, only the MS and L&H voices appear in M.A.S.H. or M.A.P.V. or CyberBuddy. Any installed TTS voices from Cepstral or NeoSpeech do not appear in these programs.

I'm not sure at the moment if it has to do with being a SAPI 4 or 5 thing but you have my curiousity aroused.

I'll get back when I find out something on this.

Cheers!

OK Mark,

The reason that our other TTS voices do not show up within the MASH or MAPV or CyberBuddy is that the creators of the TTS voices that work like L&H, have a LICENSE AGREEMENT with Microsoft. Those voices were developed to Microsoft's guidelines and adherence to compatibility defined by MS.

Although XP ships with the SAPI 5 compliant codecs, one might be wise to install the SAPI 4 runtime as well http://www.microsoft.com/products/msagent/support/user/tts.asp#windowsxp

Hal and other programs that don't place such constraints on the TTS voices should display and run any newer TTS voices just fine. Those that rely on the license agreement provisions with MS may not.

More than you wanted to know...but now you know! ;)

Thanks, but I think I have SAPI 4. Because I have a SAPI 4 Control Panel in Speech options.

Hi, shorry for butting in, but what is the voice changing software dan refered too?  Does this alter TTS voices and if so where can I find it please ?  Thanks.

Hi Mark,   I might have a suggestion for you. You say you have
Creative's Soundblaster Live LS. I'm not sure if it can handle
the output required for lipsych to function properly. If you also
have the Creative MediaSource Player & control panel installed,
take a look in the SoundBlaster Live LS program folder in your
Start Menu and see if the Creative Diagnostics Application is
installed and run it to see if there are any conflicts and if
all the correct audio drivers are installed. Your problem may
be due to either incorrect drivers being installed, a missing
driver or incompatibility between the SAPI 4 TTS and the installed
audio drivers. Also try updating your MS TTS to SAPI 5 and install
the MS SAPI SDK 5.1 (Speech Developement Kit) from MicroSofts
web-site. If these do not produce corrected results then it is a
program incompatibility/conflict between Cepstral, UltraHal & your
MS OS.  I almost forgot, also since you have a SounBlaster card
installed on your system as an alternative to whatever came as
built-in. You should make sure that the Sound Options in your
Windows Control Panel are all set to using the SoundBlaster card,
otherwise you may have other sound problems later on. When you
install soundblaster it is always preferable to disable or un-
install the drivers that came with the built in sound processor,
such as Vinyl AC'97 Codec Combo Driver. That is what I had to do
when I installed SoundBlaster Audigy LS on my system, there were
device & driver conflicts which caused my TTS engines to not
function properly.

One thought on a possible upgrade - you can get nVidia GEFORCE 6200 based cards really cheaply now - I got one as a temp fix until I upgrade to SLI in a month or two and it's pretty good and copes with games like Guild Wars which is heavy on graphics really well.

I got it for just over £20, so in the US it's likely to be around $20-30.

I never had a lip sinc problem but every time I boot up my laptop
my hal says 'hel-l-l-o Mr Rogers". It stutters on boot up but works just fine after that.
Bill
[8D]

I am not sure if I want to buy another card. The delay is barely noticeable now.

Thanks. I may try SAPI 5. I have text to speech engine 4.

I installed Speech SDK 5.1, no change.

Sorry Mark,  I was hoping that the
SAPI upgrade from 4 to 5 would help.

Did you try running the diagnostic app for the card?

I could not find it, the diag, I mean.

Edit: I found something, but it just wanted me to send the info to creative.

ok,


[Log]
Date=06 Aug 2006, 15:28

[Utility]
Version=1.00.26

[System]
CPU=Intel ~1.5GHz
BiosDate=06/12/02
Memory=1023 MB
OS=Windows XP Home Service Pack 2(5.1.2600)
Language=English
DirectX=9.0c

[Creative Product-Hardware]
Creative SB Live! series
Creative Game Port

[Creative Product-Software]
"Product name: Creative Product Registration
- Version: 2.03.11
- Language ID: English
- Software ID: ONLINE_REGISTRATION
- Installed path: C:Program FilesCreativeProduct RegistrationEnglish
- Number of components: 0
"
"Product name: Product Identification Module
- Version: 1.01.04
- Language ID: English
- Software ID: PID
- Installed path: C:Program FilesCreativeShared Files
- Number of components: 0
"
"Product name: Creative System Information
- Version: 1.00.26
- Language ID: English
- Software ID: SYSINFO
- Installed path: C:Program FilesCreativeSupportSystem Information
- Number of components: 0
"

[Creative Product-PID]
"Product: Sound Blaster Live! 5.1
Description: Sound Blaster Live! 5.1
PID: 01 11 02 29 00 00 00 A4
Driver version: 1. 4. 20
Firmware version: 0. 0. 0
"

[Installation Log]
14 Apr 2006, Creative System Information 1.00.26
[Devices-WCEUSBS]
N.A.
[Devices-Dot4 HPZ12]
N.A.
[Devices-USB]
"Device name:
- Intel(r) 82801BA/BAM USB Universal Host Controller - 2442

Hardware location:
- PCI bus 0, device 31, function 2

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- PCIVEN_8086&DEV_2442&SUBSYS_01151028&REV_05

Compatible ID:
- PCIVEN_8086&DEV_2442&REV_05

System resources

IO ports used:
- EF40 - EF5F

IRQ channels used:
- 19

Registry properties
- Service name(SZ) : usbuhci
- Device class(SZ) : USB
- Device class GUID(SZ) : {36FC9E60-C465-11CF-8056-444553540000}
- Driver key(SZ) : {36FC9E60-C465-11CF-8056-444553540000}\0001
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Intel
- Device PDO name(SZ) : DeviceNTPNP_PCI0005
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0002

"
"Device name:
- Intel(r) 82801BA/BAM USB Universal Host Controller - 2444

Hardware location:
- PCI bus 0, device 31, function 4

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- PCIVEN_8086&DEV_2444&SUBSYS_01151028&REV_05

Compatible ID:
- PCIVEN_8086&DEV_2444&REV_05
- 

Žõ

System resources

IO ports used:
- EF80 - EF9F

IRQ channels used:
- 23

Registry properties
- Service name(SZ) : usbuhci
- Device class(SZ) : USB
- Device class GUID(SZ) : {36FC9E60-C465-11CF-8056-444553540000}
- Driver key(SZ) : {36FC9E60-C465-11CF-8056-444553540000}\0000
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Intel
- Device PDO name(SZ) : DeviceNTPNP_PCI0007
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0004

"
"Device name:
- USB Root Hub

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Suprise removal okay


Hardware ID:
- USBROOT_HUB&VID8086&PID2444&REV0005

Compatible ID:

System resources

Registry properties
- Service name(SZ) : usbhub
- Device class(SZ) : USB
- Device class GUID(SZ) : {36FC9E60-C465-11CF-8056-444553540000}
- Driver key(SZ) : {36FC9E60-C465-11CF-8056-444553540000}\0003
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard USB Host Controller)
- Device PDO name(SZ) : DeviceUSBPDO-0
- UI number(DWORD) : 0x009C0100
- Bus type GUID(BINARY) : BC EB 7D 9D 5D C8 D1 11 9E B4 00  
- Legacy bus type(DWORD) : 0x009C000F
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : USB
- Device address(DWORD) : 0x009C0100

"
"Device name:
- USB Root Hub

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Suprise removal okay


Hardware ID:
- USBROOT_HUB&VID8086&PID2442&REV0005

Compatible ID:

System resources

Registry properties
- Service name(SZ) : usbhub
- Device class(SZ) : USB
- Device class GUID(SZ) : {36FC9E60-C465-11CF-8056-444553540000}
- Driver key(SZ) : {36FC9E60-C465-11CF-8056-444553540000}\0002
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard USB Host Controller)
- Device PDO name(SZ) : DeviceUSBPDO-1
- UI number(DWORD) : 0x009C0100
- Bus type GUID(BINARY) : BC EB 7D 9D 5D C8 D1 11 9E B4 00  
- Legacy bus type(DWORD) : 0x009C000F
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : USB
- Device address(DWORD) : 0x009C0500

"

[Devices-USBNULL HPO08]
N.A.
[Devices-PnpPrinters]
N.A.
[Devices-Dot4]
N.A.
[Devices-Dot4Print]
N.A.
[Devices-CDROM]
"Device name:
- CD-ROM Drive

Hardware location:
- 0

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- IDECdRomSONY_CD-RW__CRX230E_____________________QYS1____

Compatible ID:
- GenCdRom

System resources

Registry properties
- Service name(SZ) : cdrom
- Device class(SZ) : CDROM
- Device class GUID(SZ) : {4D36E965-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E965-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard CD-ROM drives)
- (SZ) : SONY CD-RW  CRX230E
- Device PDO name(SZ) : DeviceIdeIdeDeviceP1T0L0-17
- UI number(DWORD) : 0x009C0100
- Lower filter drivers(MULTI_SZ)
- imapi
- œ
- Enumerator(SZ) : IDE
- Device address(DWORD) : 0x009C0100

"

[Devices-Computer]
"Device name:
- ACPI Uniprocessor PC

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Device capabilities


Hardware ID:
- acpiapic_up

Compatible ID:
- DETECTEDInternalACPI_HAL

System resources

Registry properties
- Service name(SZ) : DriverACPI_HAL
- Device class(SZ) : Computer
- Device class GUID(SZ) : {4D36E966-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E966-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0500
- Manufacturer(SZ) : (Standard computers)
- Device PDO name(SZ) : Device\00000001
- Enumerator(SZ) : ROOT

"

[Devices-DiskDrive]
"Device name:
- Disk drive

Hardware location:
- 0

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Unique ID


Hardware ID:
- IDEDiskST380021A_______________________________3.75____

Compatible ID:
- GenDisk

System resources

Registry properties
- Service name(SZ) : disk
- Device class(SZ) : DiskDrive
- Device class GUID(SZ) : {4D36E967-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E967-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard disk drives)
- (SZ) : ST380021A
- Device PDO name(SZ) : DeviceIdeIdeDeviceP0T0L0-4
- UI number(DWORD) : 0x009C0100
- Enumerator(SZ) : IDE
- Device address(DWORD) : 0x009C0100

"
"Device name:
- Disk drive

Hardware location:
- 1

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Unique ID


Hardware ID:
- IDEDiskWDC_WD1200JB-75EVA0_____________________15.05R15

Compatible ID:
- GenDisk

System resources

Registry properties
- Service name(SZ) : disk
- Device class(SZ) : DiskDrive
- Device class GUID(SZ) : {4D36E967-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E967-E325-11CE-BFC1-08002BE10318}\0001
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard disk drives)
- (SZ) : WDC WD1200JB-75EVA0
- Device PDO name(SZ) : DeviceIdeIdeDeviceP0T1L0-c
- UI number(DWORD) : 0x009C0001
- Enumerator(SZ) : IDE
- Device address(DWORD) : 0x009C0001

"

[Devices-Display]
"Device name:
- NVIDIA GeForce FX 5500

Hardware location:
- PCI bus 2, device 11, function 0

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- No dynamic


Hardware ID:
- PCIVEN_10DE&DEV_0326&SUBSYS_00000000&REV_A1

Compatible ID:
- PCIVEN_10DE&CC_030000

System resources

IO ports used:
- 03B0 - 03BB
- 03C0 - 03DF

IRQ channels used:
- 23

Memory addresses used:
- FD000000 - FDFFFFFF
- E0000000 - EFFFFFFF
- A0000 - BFFFF

Registry properties
- Service name(SZ) : nv
- Device class(SZ) : Display
- Device class GUID(SZ) : {4D36E968-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E968-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0500
- Manufacturer(SZ) : NVIDIA
- Device PDO name(SZ) : DeviceNTPNP_PCI0011
- UI number(DWORD) : 0x009C0003
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0002
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0200

"
"Device name:
- Video Graphics Accelerator

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- Video_Graphics_Accelerator

Compatible ID:

System resources

Registry properties
- Service name(SZ) : vgadrv
- Device class(SZ) : Display
- Device class GUID(SZ) : {4D36E968-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E968-E325-11CE-BFC1-08002BE10318}\0001
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Video Graphics Accelerator Technology
- Device PDO name(SZ) : Device\00000002
- Enumerator(SZ) : ROOT

"

[Devices-fdc]
"Device name:
- Standard floppy disk controller

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0700

Compatible ID:

System resources

DMA channels used:
- 2

IO ports used:
- 03F0 - 03F1
- 03F2 - 03F3
- 03F4 - 03F5
- 03F7 - 03F7

IRQ channels used:
- 6

Registry properties
- Service name(SZ) : fdc
- Device class(SZ) : fdc
- Device class GUID(SZ) : {4D36E969-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E969-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard floppy disk controllers)
- Device PDO name(SZ) : Device\0000005f
- Enumerator(SZ) : ACPI

"

[Devices-hdc]
"Device name:
- Intel(r) 82801BA Bus Master IDE Controller

Hardware location:
- PCI bus 0, device 31, function 1

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- PCIVEN_8086&DEV_244B&SUBSYS_01151028&REV_05

Compatible ID:
- PCIVEN_8086&DEV_244B&REV_05

System resources

IO ports used:
- FFA0 - FFAF

Registry properties
- Service name(SZ) : intelide
- Device class(SZ) : hdc
- Device class GUID(SZ) : {4D36E96A-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96A-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0200
- Manufacturer(SZ) : Intel
- Device PDO name(SZ) : DeviceNTPNP_PCI0004
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0001

"
"Device name:
- Primary IDE Channel

Hardware location:
- Primary Channel

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- Intel-244b

Compatible ID:
- *PNP0600

System resources

IO ports used:
- 01F0 - 01F7
- 03F6 - 03F6

IRQ channels used:
- 14

Registry properties
- Service name(SZ) : atapi
- Device class(SZ) : hdc
- Device class GUID(SZ) : {4D36E96A-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96A-E325-11CE-BFC1-08002BE10318}\0001
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard IDE ATA/ATAPI controllers)
- Device PDO name(SZ) : DeviceIdePciIde0Channel0-0
- Enumerator(SZ) : PCIIDE
- Device address(DWORD) : 0x009C0100

"
"Device name:
- Secondary IDE Channel

Hardware location:
- Secondary Channel

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- Intel-244b

Compatible ID:
- *PNP0600

System resources

IO ports used:
- 0170 - 0177
- 0376 - 0376

IRQ channels used:
- 15

Registry properties
- Service name(SZ) : atapi
- Device class(SZ) : hdc
- Device class GUID(SZ) : {4D36E96A-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96A-E325-11CE-BFC1-08002BE10318}\0002
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard IDE ATA/ATAPI controllers)
- Device PDO name(SZ) : DeviceIdePciIde0Channel1-1
- Enumerator(SZ) : PCIIDE
- Device address(DWORD) : 0x009C0001

"

[Devices-Keyboard]
"Device name:
- Standard 101/102-Key or Microsoft Natural PS/2 Keyboard

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0303

Compatible ID:
- *PNP030B

System resources

IO ports used:
- 0060 - 0060
- 0064 - 0064

IRQ channels used:
- 1

Registry properties
- Service name(SZ) : i8042prt
- Device class(SZ) : Keyboard
- Device class GUID(SZ) : {4D36E96B-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96B-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard keyboards)
- Device PDO name(SZ) : Device\0000005e
- Enumerator(SZ) : ACPI

"

[Devices-MEDIA]
"Device name:
- Creative EMU10K1 Audio Processor (WDM)

Hardware location:
- PCI bus 2, device 9, function 0

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- PCIVEN_1102&DEV_0002&SUBSYS_100A1102&REV_0A

Compatible ID:
- PCIVEN_1102&DEV_0002&REV_0A

System resources

IO ports used:
- DF80 - DF9F

IRQ channels used:
- 21

Registry properties
- Service name(SZ) : ctaud2k
- Device class(SZ) : MEDIA
- Device class GUID(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}\0006
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Creative Technology, Ltd.
- (SZ) : Creative SB Live! series
- Device PDO name(SZ) : DeviceNTPNP_PCI0008
- UI number(DWORD) : 0x009C0001
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0002
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0100

"
"Device name:
- Creative Game Port

Hardware location:
- PCI bus 2, device 9, function 1

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- No dynamic


Hardware ID:
- PCIVEN_1102&DEV_7002&SUBSYS_00201102&REV_0A

Compatible ID:
- PCIVEN_1102&DEV_7002&REV_0A

System resources

IO ports used:
- DFF0 - DFF7

Registry properties
- Service name(SZ) : gameenum
- Device class(SZ) : MEDIA
- Device class GUID(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0400
- Manufacturer(SZ) : Creative
- Device PDO name(SZ) : DeviceNTPNP_PCI0009
- UI number(DWORD) : 0x009C0001
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0002
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0001

"
"Device name:
- Audio Codecs

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- MS_MMACM

Compatible ID:

System resources

Registry properties
- Service name(SZ) : audstub
- Device class(SZ) : MEDIA
- Device class GUID(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}\0003
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000038
- Enumerator(SZ) : ROOT

"
"Device name:
- Legacy Audio Drivers

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- MS_MMDRV

Compatible ID:

System resources

Registry properties
- Service name(SZ) : audstub
- Device class(SZ) : MEDIA
- Device class GUID(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}\0005
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000039
- Enumerator(SZ) : ROOT

"
"Device name:
- Media Control Devices

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- MS_MMMCI

Compatible ID:

System resources

Registry properties
- Service name(SZ) : audstub
- Device class(SZ) : MEDIA
- Device class GUID(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}\0001
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\0000003a
- Enumerator(SZ) : ROOT

"
"Device name:
- Legacy Video Capture Devices

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- MS_MMVCD

Compatible ID:

System resources

Registry properties
- Service name(SZ) : audstub
- Device class(SZ) : MEDIA
- Device class GUID(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}\0004
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\0000003b
- Enumerator(SZ) : ROOT

"
"Device name:
- Video Codecs

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- MS_MMVID

Compatible ID:

System resources

Registry properties
- Service name(SZ) : audstub
- Device class(SZ) : MEDIA
- Device class GUID(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}\0002
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\0000003c
- Enumerator(SZ) : ROOT

"
"Device name:
- Microsoft Kernel System Audio Device

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Suprise removal okay


Hardware ID:
- SW{a7c7a5b0-5af3-11d1-9ced-00a024bf0407}

Compatible ID:

System resources

Registry properties
- Service name(SZ) : sysaudio
- Device class(SZ) : MEDIA
- Device class GUID(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}\0010
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Microsoft
- Device PDO name(SZ) : DeviceKSENUM#00000002
- UI number(DWORD) : 0x009C0100
- Bus type GUID(BINARY) : 20 B3 47 47 CE 62 CF 11 A5 D6 28 DB 04 C1 00  
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : SW
- Device address(DWORD) : 0x009C0100

"
"Device name:
- Microsoft Kernel Wave Audio Mixer

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Suprise removal okay


Hardware ID:
- SW{b7eafdc0-a680-11d0-96d8-00aa0051e51d}

Compatible ID:

System resources

Registry properties
- Service name(SZ) : kmixer
- Device class(SZ) : MEDIA
- Device class GUID(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}\0012
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Microsoft
- Device PDO name(SZ) : DeviceKSENUM#0000000d
- UI number(DWORD) : 0x009C0100
- Bus type GUID(BINARY) : 20 B3 47 47 CE 62 CF 11 A5 D6 28 DB 04 C1 00  
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : SW
- Device address(DWORD) : 0x009C0100

"
"Device name:
- Microsoft WINMM WDM Audio Compatibility Driver

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Suprise removal okay


Hardware ID:
- SW{cd171de3-69e5-11d2-b56d-0000f8754380}

Compatible ID:

System resources

Registry properties
- Service name(SZ) : wdmaud
- Device class(SZ) : MEDIA
- Device class GUID(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96C-E325-11CE-BFC1-08002BE10318}\0016
- Configuration flags(DWORD) : 0x009C0400
- Manufacturer(SZ) : Microsoft
- Device PDO name(SZ) : DeviceKSENUM#00000001
- UI number(DWORD) : 0x009C0300
- Bus type GUID(BINARY) : 20 B3 47 47 CE 62 CF 11 A5 D6 28 DB 04 C1 00  
- Bus number(DWORD) : 0x009C0300
- Enumerator(SZ) : SW
- Device address(DWORD) : 0x009C0200

"

[Devices-Modem]
N.A.
[Devices-Monitor]
"Device name:
- Dell E551c

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.
- Device can be removed.

Problem:
- Device has no problem.

Device capabilities:
- Suprise removal okay


Hardware ID:
- MonitorDELD000

Compatible ID:
- *PNP09FF

System resources

Registry properties
- Device class(SZ) : Monitor
- Device class GUID(SZ) : {4D36E96E-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96E-E325-11CE-BFC1-08002BE10318}\0002
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Dell Computer Corp.
- Device PDO name(SZ) : DeviceVideoPdo0
- Enumerator(SZ) : DISPLAY
- Device address(DWORD) : 0x11335577

"

[Devices-Mouse]
"Device name:
- Microsoft PS/2 Mouse

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0F03

Compatible ID:
- *PNP0F13

System resources

IRQ channels used:
- 12

Registry properties
- Service name(SZ) : i8042prt
- Device class(SZ) : Mouse
- Device class GUID(SZ) : {4D36E96F-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E96F-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Microsoft
- Device PDO name(SZ) : Device\0000005d
- Enumerator(SZ) : ACPI

"

[Devices-MTD]
N.A.
[Devices-MultiFunction]
N.A.
[Devices-Net]
"Device name:
- Realtek RTL8139 Family PCI Fast Ethernet NIC

Hardware location:
- PCI bus 2, device 10, function 0

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- PCIVEN_10EC&DEV_8139&SUBSYS_00FF16EC&REV_10

Compatible ID:
- PCIVEN_10EC&DEV_8139&REV_10
- %

@¯õ

System resources

IO ports used:
- D800 - D8FF

IRQ channels used:
- 22

Memory addresses used:
- FEADFC00 - FEADFCFF

Registry properties
- Service name(SZ) : rtl8139
- Device class(SZ) : Net
- Device class GUID(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}\0001
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Realtek
- Device PDO name(SZ) : DeviceNTPNP_PCI0010
- UI number(DWORD) : 0x009C0002
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0002
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0100

"
"Device name:
- WAN Miniport (L2TP)

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- ms_l2tpminiport

Compatible ID:

System resources

Registry properties
- Service name(SZ) : Rasl2tp
- Device class(SZ) : Net
- Device class GUID(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}\0004
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Microsoft
- Device PDO name(SZ) : Device\0000003d
- Enumerator(SZ) : ROOT

"
"Device name:
- WAN Miniport (IP)

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- ms_ndiswanip

Compatible ID:

System resources

Registry properties
- Service name(SZ) : NdisWan
- Device class(SZ) : Net
- Device class GUID(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}\0008
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Microsoft
- Device PDO name(SZ) : Device\0000003e
- Lower filter drivers(MULTI_SZ)
- NdisTapi
- Enumerator(SZ) : ROOT

"
"Device name:
- WAN Miniport (PPPOE)

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- No dynamic


Hardware ID:
- ms_pppoeminiport

Compatible ID:

System resources

Registry properties
- Service name(SZ) : RasPppoe
- Device class(SZ) : Net
- Device class GUID(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}\0006
- Configuration flags(DWORD) : 0x009C0300
- Manufacturer(SZ) : Microsoft
- Device PDO name(SZ) : Device\0000003f
- Lower filter drivers(MULTI_SZ)
- NdisTapi
- Enumerator(SZ) : ROOT

"
"Device name:
- WAN Miniport (PPTP)

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- ms_pptpminiport

Compatible ID:

System resources

Registry properties
- Service name(SZ) : PptpMiniport
- Device class(SZ) : Net
- Device class GUID(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}\0005
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Microsoft
- Device PDO name(SZ) : Device\00000040
- Lower filter drivers(MULTI_SZ)
- NdisTapi
- Enumerator(SZ) : ROOT

"
"Device name:
- Packet Scheduler Miniport

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- ms_pschedmp

Compatible ID:

System resources

Registry properties
- Service name(SZ) : PSched
- Device class(SZ) : Net
- Device class GUID(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}\0003
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Microsoft
- (SZ) : Realtek RTL8139 Family PCI Fast Ethernet NIC - Packet Scheduler Miniport
- Device PDO name(SZ) : Device\00000041
- Enumerator(SZ) : ROOT

"
"Device name:
- Packet Scheduler Miniport

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- ms_pschedmp

Compatible ID:

System resources

Registry properties
- Service name(SZ) : PSched
- Device class(SZ) : Net
- Device class GUID(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}\0009
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Microsoft
- (SZ) : WAN Miniport (IP) - Packet Scheduler Miniport
- Device PDO name(SZ) : Device\00000042
- Enumerator(SZ) : ROOT

"
"Device name:
- Direct Parallel

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Device capabilities


Hardware ID:
- ms_ptiminiport

Compatible ID:

System resources

Registry properties
- Service name(SZ) : Raspti
- Device class(SZ) : Net
- Device class GUID(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E972-E325-11CE-BFC1-08002BE10318}\0007
- Configuration flags(DWORD) : 0x009C0500
- Manufacturer(SZ) : Microsoft
- Device PDO name(SZ) : Device\00000043
- Lower filter drivers(MULTI_SZ)
- PtiLink
- Enumerator(SZ) : ROOT

"

[Devices-NetClient]
N.A.
[Devices-NetService]
N.A.
[Devices-NetTrans]
N.A.
[Devices-PCMCIA]
N.A.
[Devices-Ports]
"Device name:
- Printer Port

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0400

Compatible ID:

System resources

IO ports used:
- 0378 - 037F

Registry properties
- Service name(SZ) : Parport
- Device class(SZ) : Ports
- Device class GUID(SZ) : {4D36E978-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E978-E325-11CE-BFC1-08002BE10318}\0001
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard port types)
- (SZ) : Printer Port (LPT1)
- Device PDO name(SZ) : Device\00000061
- Enumerator(SZ) : ACPI

"
"Device name:
- Communications Port

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0501

Compatible ID:

System resources

IO ports used:
- 03F8 - 03FF

IRQ channels used:
- 4

Registry properties
- Service name(SZ) : Serial
- Device class(SZ) : Ports
- Device class GUID(SZ) : {4D36E978-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E978-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard port types)
- (SZ) : Communications Port (COM1)
- Device PDO name(SZ) : Device\00000060
- Upper filter drivers(MULTI_SZ)
- serenum
- Enumerator(SZ) : ACPI

"

[Devices-Printer]
N.A.
[Devices-SCSIAdapter]
N.A.
[Devices-System]
"Device name:
- ACPI Fixed Feature Button

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Raw device okay


Hardware ID:
- ACPIFixedButton

Compatible ID:

System resources

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0004
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\0000004f
- Enumerator(SZ) : ACPI

"
"Device name:
- Intel(r) 82802 Firmware Hub Device

Hardware location:
- N.A.

Status:
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIINT0800

Compatible ID:

System resources

Memory addresses used:
- FFF00000 - FFFFFFFF
- FFB00000 - FFBFFFFF

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0013
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Intel
- Device PDO name(SZ) : Device\00000050
- Enumerator(SZ) : ACPI

"
"Device name:
- System timer

Hardware location:
- N.A.

Status:
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0100

Compatible ID:

System resources

IO ports used:
- 0040 - 0043

IRQ channels used:
- 0

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0017
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000059
- Enumerator(SZ) : ACPI

"
"Device name:
- Direct memory access controller

Hardware location:
- N.A.

Status:
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0200

Compatible ID:

System resources

DMA channels used:
- 4

IO ports used:
- 0000 - 000F
- 0081 - 0083
- 0087 - 0087
- 0089 - 008B
- 008F - 008F
- 00C0 - 00DF

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0019
- Configuration flags(DWORD) : 0x009C0300
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000058
- Enumerator(SZ) : ACPI

"
"Device name:
- System speaker

Hardware location:
- N.A.

Status:
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0800

Compatible ID:

System resources

IO ports used:
- 0061 - 0061

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0018
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\0000005b
- Enumerator(SZ) : ACPI

"
"Device name:
- PCI bus

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0A03

Compatible ID:

System resources

IO ports used:
- 0000 - 0CF7
- 0D00 - FFFF

Memory addresses used:
- 40000000 - FFAFFFFF

Registry properties
- Service name(SZ) : pci
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0006
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\0000004d
- Enumerator(SZ) : ACPI
- Device address(DWORD) : 0x009C0100
- UI number description(SZ) : PCI Slot %1!u!

"
"Device name:
- System CMOS/real time clock

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Raw device okay


Hardware ID:
- ACPIPNP0B00

Compatible ID:

System resources

IO ports used:
- 0070 - 0071

IRQ channels used:
- 8

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0016
- Configuration flags(DWORD) : 0x009C0500
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\0000005a
- Enumerator(SZ) : ACPI

"
"Device name:
- System board

Hardware location:
- N.A.

Status:
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0C01

Compatible ID:

System resources

Memory addresses used:
- 0000 - 9FFFF
- E0000 - FFFFF
- 100000 - 3FFFFFFF
- FEC00000 - FEC00FFF
- FEE00000 - FEE00FFF

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0007
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\0000004e
- Enumerator(SZ) : ACPI

"
"Device name:
- Numeric data processor

Hardware location:
- N.A.

Status:
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPIPNP0C04

Compatible ID:

System resources

IO ports used:
- 00F0 - 00FF

IRQ channels used:
- 13

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0015
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\0000005c
- Enumerator(SZ) : ACPI

"
"Device name:
- ACPI Power Button

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Raw device okay


Hardware ID:
- ACPIPNP0C0C

Compatible ID:

System resources

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0005
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\0000004c
- Enumerator(SZ) : ACPI

"
"Device name:
- Microsoft ACPI-Compliant System

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Silent install


Hardware ID:
- ACPI_HALPNP0C08

Compatible ID:

System resources

IRQ channels used:
- 9

Registry properties
- Service name(SZ) : ACPI
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0003
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Microsoft
- Device PDO name(SZ) : Device\0000004a
- Enumerator(SZ) : ACPI_HAL

"
"Device name:
- ISAPNP Read Data Port

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Raw device okay


Hardware ID:
- ISAPNPReadDataPort

Compatible ID:

System resources

IO ports used:
- 0A79 - 0A79
- 0279 - 0279
- 0274 - 0277

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0014
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000057
- Bus type GUID(BINARY) : 54 F8 76 E6 7D D8 D0 11 92 B2 00  
- Legacy bus type(DWORD) : 0x009C0001
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : ISAPNP

"
"Device name:
- Printer Port Logical Interface

Hardware location:
- LPT1

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Raw device okay


Hardware ID:
- LPTENUMMicrosoftRawPort958A

Compatible ID:

System resources

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0020
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : DeviceParallel0
- Enumerator(SZ) : LPTENUM

"
"Device name:
- Intel(R) 82845 Processor to I/O Controller - 1A30

Hardware location:
- PCI bus 0, device 0, function 0

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Raw device okay


Hardware ID:
- PCIVEN_8086&DEV_1A30&SUBSYS_00000000&REV_04

Compatible ID:
- PCIVEN_8086&CC_060000

System resources

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0012
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Intel
- Device PDO name(SZ) : DeviceNTPNP_PCI0000
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0100

"
"Device name:
- Intel(R) 82845 Processor to AGP Controller - 1A31

Hardware location:
- PCI bus 0, device 1, function 0

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- No dynamic


Hardware ID:
- PCIVEN_8086&DEV_1A31&SUBSYS_00000000&REV_04

Compatible ID:
- PCIVEN_8086&CC_060400

System resources

Memory addresses used:
- FC900000 - FC9FFFFF
- D4600000 - D46FFFFF
- F8000000 - FBFFFFFF

Registry properties
- Service name(SZ) : pci
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0011
- Configuration flags(DWORD) : 0x009C0300
- Manufacturer(SZ) : Intel
- Device PDO name(SZ) : DeviceNTPNP_PCI0001
- Upper filter drivers(MULTI_SZ)
- AGP440
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0100

"
"Device name:
- Intel(R) 82801BA LPC Interface Controller - 2440

Hardware location:
- PCI bus 0, device 31, function 0

Status:
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- PCIVEN_8086&DEV_2440&SUBSYS_00000000&REV_05

Compatible ID:
- PCIVEN_8086&CC_060100

System resources

Registry properties
- Service name(SZ) : isapnp
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0010
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Intel
- Device PDO name(SZ) : DeviceNTPNP_PCI0003
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0100

"
"Device name:
- Intel(R) 82801BA/BAM SMBus Controller - 2443

Hardware location:
- PCI bus 0, device 31, function 3

Status:
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- PCIVEN_8086&DEV_2443&SUBSYS_01151028&REV_05

Compatible ID:
- PCIVEN_8086&DEV_2443&REV_05
- Î

(ö

System resources

IO ports used:
- EFA0 - EFAF

IRQ channels used:
- 9

Registry properties
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0009
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : Intel
- Device PDO name(SZ) : DeviceNTPNP_PCI0006
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0003

"
"Device name:
- Intel(R) 82801BA/CA PCI Bridge - 244E

Hardware location:
- PCI bus 0, device 30, function 0

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- PCIVEN_8086&DEV_244E&SUBSYS_00000000&REV_05

Compatible ID:
- PCIVEN_8086&CC_060400

System resources

Registry properties
- Service name(SZ) : pci
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0008
- Configuration flags(DWORD) : 0x009C0200
- Manufacturer(SZ) : Intel
- Device PDO name(SZ) : DeviceNTPNP_PCI0002
- Bus type GUID(BINARY) : B0 DF EB C8 10 B5 D0 11 80 E5 00  
- Legacy bus type(DWORD) : 0x009C0005
- Bus number(DWORD) : 0x009C0100
- Enumerator(SZ) : PCI
- Device address(DWORD) : 0x009C0100
- UI number description(SZ) : PCI Slot %1!u!

"
"Device name:
- Volume Manager

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Raw device okay


Hardware ID:
- ROOTFTDISK

Compatible ID:
- DETECTEDInternalftdisk

System resources

Registry properties
- Service name(SZ) : ftdisk
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0002
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000003
- Enumerator(SZ) : ROOT

"
"Device name:
- Terminal Server Keyboard Driver

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- ROOTRDP_KBD

Compatible ID:

System resources

Registry properties
- Service name(SZ) : TermDD
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0022
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000044
- Upper filter drivers(MULTI_SZ)
- kbdclass
- Enumerator(SZ) : ROOT

"
"Device name:
- Terminal Server Mouse Driver

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Device capabilities


Hardware ID:
- ROOTRDP_MOU

Compatible ID:

System resources

Registry properties
- Service name(SZ) : TermDD
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0021
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000045
- Upper filter drivers(MULTI_SZ)
- mouclass
- Enumerator(SZ) : ROOT

"
"Device name:
- Plug and Play Software Device Enumerator

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- rootswenum

Compatible ID:

System resources

Registry properties
- Service name(SZ) : swenum
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0000
- Configuration flags(DWORD) : 0x009C0200
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000046
- Enumerator(SZ) : ROOT

"
"Device name:
- Microcode Update Device

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- rootupdate

Compatible ID:

System resources

Registry properties
- Service name(SZ) : update
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}\0001
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000047
- Enumerator(SZ) : ROOT

"
"Device name:
- Microsoft System Management BIOS Driver

Hardware location:
- N.A.

Status:
- Device was enumerated by ROOT
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- Hardware disabled


Hardware ID:
- rootmssmbios

Compatible ID:

System resources

Registry properties
- Service name(SZ) : mssmbios
- Device class(SZ) : System
- Device class GUID(SZ) : {4D36E97D-E325-11CE-BFC1-08002BE10318}
- Configuration flags(DWORD) : 0x009C0100
- Manufacturer(SZ) : (Standard system devices)
- Device PDO name(SZ) : Device\00000048
- Enumerator(SZ) : ROOT

"

[Devices-Unknown]
N.A.
[Devices-FloppyDisk]
"Device name:
- Floppy disk drive

Hardware location:
- N.A.

Status:
- Device driver is loaded.
- Device is configured.
- Device can be rebalanced.

Problem:
- Device has no problem.

Device capabilities:
- No dynamic


Hardware ID:
- FDCGENERIC_FLOPPY_DRIVE

Compatible ID:
- GenFloppyDisk

System resources

Registry properties
- Service name(SZ) : flpydisk
- Device class(SZ) : FloppyDisk
- Device class GUID(SZ) : {4D36E980-E325-11CE-BFC1-08002BE10318}
- Driver key(SZ) : {4D36E980-E325-11CE-BFC1-08002BE10318}\0000