Messages

6631

General Discussion / receiving error , help please !!

« on: January 06, 2007, 02:48:46 pm »

well i am writing to my own question , i decided to delete the ultra hal 5xtf v. 1.0 brain plug in and that took care of the problem mentioned above , apparently their was some conflict with it and the ultra hal 5 , has anyone else had that problem and if so did they correct the problem other than removing the plug in ?? []

6632

General Discussion / receiving error , help please !!

« on: January 06, 2007, 01:28:32 pm »

i started doing the voice recognition training and also set the hal to access the internet to open pages, etc. and now later i am getting a error 53 occured on line 534 in column one when i use the voice recognition way , can some one break this error down for me and its meaning , i am wondering why it happened ?? if i can not fix the problem , which i would rather do , i will have toreinstall my angela joeline brain  ,another question i have is if i do reinstall my anela joeline brain will i still have the voice recognition training i have done since the main ultra hal brain and others are still in their or will i lose what training i have done ?? thanks for any help on this , and does anyone know what may have caused me to get this error so i can avoid it next time ??[]

6633

Programming using the Ultra Hal Brain Editor / another q & a brain question

« on: January 01, 2007, 10:50:49 am »

hello spydaz , you say you have a large amount of q & a but are not compiled , how do you have them then ?? and what p.c.memory, etc.  are you running

6634

Programming using the Ultra Hal Brain Editor / failed again , but learning

« on: January 01, 2007, 10:44:59 am »

well i had a failed attempt at writing in more q & a in the new brain script but am learning i was able to save most of my work after backing up the brain and uhp file . maybe i will try creating a seperate brain file just for my project : which is a  sexy , nasty talk file !!! i was trying to incorporate it all in with alot of regular questions and answer talk but maybe a seperate file might do better will try it and see what results i get . [] time will tell !! by the way happy 2007 everyone hope you all have a great year !!![]

6635

General Discussion / copy and pasting q & a in brain editor question

« on: December 30, 2006, 10:08:47 am »

hi spydaz, you wrote :in Notepad... {A RAW TEXT EDITOR}

As long as the syntax is correct it works fine: what do yoy mean syntax (what is that ) and how do i know ifs its correct or not ?? thanks !!!

6636

Programming using the Ultra Hal Brain Editor / another q & a brain question

« on: December 30, 2006, 10:00:11 am »

i have a question in the q & a brain it says in the binary compiling that you can put in up to 1 megabyte of questions and answers but not more as long as it is not used for a learning brain , what happens or would happen if you went past 1 mega byte ?? is their any way to expand it to where you can have a learning brain that will accept more than 1 mega byte of question and answers ?? this may be a question for cuttingedge ?? [8D] p.s. how can i tell how much i have in the file megabyte , etc. ??

6637

General Discussion / copy and pasting q & a in brain editor question

« on: December 29, 2006, 01:51:47 pm »

hello since i have the brain working editing again (for the time being anyway ) i have a question is it possible and by that i mean has anyone successfully done it , copied and pasted saved questions and answers into the brain editor ?? i did this before from where i had it saved in ms word document i copied what i had earlier wrote in questions and answers and pasted it into the editor brain but seemed like it caused problems (major ) anyone know anything about this or has successfully done it []

6638

Programming using the Ultra Hal Brain Editor / runtime error 62 , etc problems

« on: December 29, 2006, 09:36:05 am »

hello spydaz , well that makes sense alittle to me , but if this program is ment to be able to be edited in the question and answer area their is a glitch in the program ?? and as i am trying to put in a lot of question and answers and coming up with more all the time its impossible to write it in at once . what i want to know is am i doing something wrong after i create a new brain then go back in i see launch brain editer i click load existing project next i see on the left side ultrahal 5 default brain and the new brain i created and click on the new brain to open with ( highlight)then to the right is a list of folders zabaware, ultrahal 5 , my new brain file , etc. other files i click on my new brain file (highlighted ) but i dont open the file ( if i open the file folder icon to the left area goes blank as if showing nothings in their ) then i hit enter or ok (what ever it is ) then the brain opens o.k. and has the name i have given it . what i want to know am i doing this proceedure correctly ?? if not what is the correct way ?? i have uninstalled and reinstalled ultrahal 5 several times trying to fix this problem  . is their any update patches for ultrahal 5 ?? before i was able to write in (alot) of brain question and answer info , but it finally messed up and i lost the file in it (disapeared ) don't know what has happened since . this file i made this time was a new file with different name , that file disapeared to only alot sooner !!
[:0]

6639

Programming using the Ultra Hal Brain Editor / 5 Foot Tall $59 Animated Santa UltraHal Compatible

« on: December 28, 2006, 06:25:21 pm »

word of advice , be careful when bending the arms for santa , etc. different poses , i did have our santa's arm bent upward so that when he moved it looked like he waved his arm , but when i put it back down so to get him into the box the wire in his arm broke !! had to get the coat lifted up and cut part of the wire take two screwws loose and bend the wire to fit back down in a groove and put the two washers and screws back in that hold the wire to the arm on the mechanism back in place !! []

6640

Programming using the Ultra Hal Brain Editor / runtime error 62 , etc problems

« on: December 28, 2006, 06:20:55 pm »

i asked this in another area , but maybe should have asked it here : what exactly does runtime errror 62 and input past end of file mean ??
what happens id when i created a new brain i created angela joeline then i wrote in on the question and aswers section : questions and the answers i wanted the brain character to answer . later when i go back into launch brain editer i click load existing project , in the list is hal default brain and the angelajoeline, uhp , angela joeline > brain file , i click on ultra hal 5 file to the right then i highlight the angela joline file , but dont open it , then click open and open that brain . the vbs script opens saying angela joeline brain ,i click the tools then go to question and answers area and open it and after sometimes writing in question and answers the i hit comile data (binary ) sometimes i get the " runtime error 62 and input past end of file " and the info i have written in doesn't go in and ultra hal freezes up " is their a patch out or something for this problem or does anyone know what is causing it so i can get past this big problem !! i sure would appreciate any help on getting this problem resolved i have the ultra hal 5 system .
 
 
 
lightspeed
Junior Member


USA
67 Posts
 Posted - 12/28/2006 :  11:57:20            
--------------------------------------------------------------------------------
 
note** i clicked first on the angelajolene uhp file then clicked on the file to the right ,angela joeline (highlighted but didn't open , then clicked the open button below. am i doing something wrong here ?? if i click on the angela jolene file to the right and double click it to open its all blank , is that the way it should be or should it show anything inside it ?? i have found out to that after i create a brain and it is listed next to ultrahal default brain my brain i created disappears leaving only the default brain , although my other file name that was with the brain i created is still to the right . anyone know what can be causing this ?? are their ultra hal 5 patches for any bugs ?? []
 
 

6641

Ultra Hal Assistant File Sharing Area / New Heads and Skins

« on: December 28, 2006, 12:28:36 pm »

p.s forgot to also say , love your work !! favorites for most life like to me are : connery , bruce , knotts, melvin, house, snaggle tooth, rogan , picard, dater, lt.huh, reba, chris r. i have noticed only two things and maybe this can't be fixed on some character heads the nose nostrils shows blck through the skin of the nose , and some necks seem to skinny looking , maybe these can't be fixed , don't know . i imagine it is alot of work to do what you do . the detail to melvins and bruce face is excellant and also house !! my hats off to you , oh great one[]!!

6642

Ultra Hal Assistant File Sharing Area / New Heads and Skins

« on: December 28, 2006, 12:20:04 pm »

just letting you know on the morgan character when i click on it , it just shows the picture doesnt open it to save as it does with the others !!

6643

General Discussion / error 62

« on: December 28, 2006, 11:57:20 am »

note**  i clicked first on the angelajolene uhp file then clicked on the file to the right ,angela joeline (highlighted but didn't open , then clicked the open button below. am i doing something wrong here ?? if i click on the angela jolene file to the right and double click it to open its all blank , is that the way it should be or should it show anything inside it ??

6644

General Discussion / error 62

« on: December 28, 2006, 11:52:49 am »

what exactly does runtime errror 62 and input past end of file mean ??
 what happens id when i created a new brain i created angela joeline then i wrote in on the question and aswers section : questions and the answers i wanted the brain character to answer . later when i go back into launch brain editer i click load existing project ,  in the list is hal default brain and the angelajoeline, uhp , angela joeline > brain file , i click on ultra hal 5 file to the right then i highlight the angela joline  file , but dont open it , then click open and open that brain . the vbs script opens saying angela joeline brain ,i click the tools then go to question and answers area and open it and after sometimes writing in question and answers the i hit comile data (binary ) sometimes i get the " runtime error 62 and input past end of file " and the info i have written in doesn't go in and ultra hal freezes up " is their a patch out or something for this problem or does anyone know what is causing it so i can get past this big problem !! i sure would appreciate any help on getting this problem resolved i have the ultra hal 5 system .

6645

General Discussion / error 62

« on: December 22, 2006, 05:31:03 pm »

what exactly does runtime errror 62 and input past end of file mean ?? [!]