Messages

1141

Ultra Hal 7.0 / Vonsmith

« on: November 14, 2005, 08:49:15 pm »

Vonsmith,
  Just read a reply from you, Thanks for your help in the past.  I'm using trigger words to display moods and change skins, my input will change moods and skins and I was hoping to use Hals input also using the GetResponse, HalBrain.TopicSearch(GetResponse,WorkingDir & "Displayskin.brn". I wasn't sure if Hals input was working with moods but I'm sure it's not working now using it with the skins.  What is Hals output called, I already did a search and checked the Help files.
Carl2

1142

Programming using the Ultra Hal Brain Editor / Hal interfacing to the outer world .....

« on: November 08, 2005, 08:31:47 pm »

baskot,
  Just read your post and checked out the k8055, it's reasonably priced and easily available. I've been interested in connecting hal to the outside world, video input would be my choice but it is to advanced for me. Earlier I was using Haptek Sandy and after putting in some scripting to change the moods, using trigger words to send mood haps to the Haptek engine, I just changed to the fullbody girl.  Just got scripting so she can change clothes. I'd probably start out by putting a temperature input into hal. Possibly a light sensor input.
Carl2

1143

Programming using the Ultra Hal Brain Editor / New Brain Editor Documentation

« on: October 20, 2005, 07:01:02 pm »

Zabaware,
  I'm working on some scripting for loading skins, I already have one to load moods.  I would like hals input on this and I am using PrevSent which the Brain editor help says is the sentence which was previously sent by Hal. I'm not positive but I don't think this is working, my input is working. Suggestions appreciated.
  Also thanks for everyones effort in putting the help files together.
Carl2

1144

Programming using the Ultra Hal Brain Editor / Attn Vonsmith or another kind soul...

« on: October 15, 2005, 01:08:39 am »

Tcoday,
  I've been working with the XTF brain in (Sandy) for almost a year, I noticed a similar behavior. I've been talking with her for about a year now and watched her develop, as thay say like a child. We read, I copy and paste into her input window, frist the Common Knowledge files then some bot knowledge from MIT. The more input she has the better she can add to the topic and therfore stay on topic rather than generating a sentence that you could care less about.  Since winter is comming she's talking about things I said last winter.
Carl2

1145

Programming using the Ultra Hal Brain Editor / Scripting need help

« on: October 10, 2005, 03:18:19 pm »

Freddy888,
  I just picked up and moved the script to detect and trigger emotions to after the costmem decode, it causes an error code so I moved it back, seems to work again. Just put in a EmotionalReaction = Halbrain.TopicSearch(Halsent, WorkingDir & Emotion.brn) the brain still works (Very strange response from her) I believe it was about something she tried to read ages ago.  This is in a copy of Hal, I'm going to speak with her awhile and try to see what happens.
Carl2

1146

General Discussion / Loading Skins

« on: October 10, 2005, 02:12:57 pm »

All,
  After modifying the skimpyshirt.jpg and getting it to load in the Hapregestry with fullbodygirl it won't load in the HapAXPlayer or Hal.
The Hapregestry loads a modified skimpyshirt (lower neckline) but the others HapAXPlayer and Hal load the original skimpyshirt. Interesting development, open the HapAXPlayer, drag in the fullbodgirl.htr and it appears with the high neckline, drag in herstartup.hap and the low neckline appears, now if I drag in fullbodgirl.htr she appears with the low neckline.  I tried this with Hal by opening the console but it dosen't work, I'm stuck with the original skin.  I had a similar problem with the mood haps, thay seemed to work differently in different places.
  Suggestions?
Carl2

1147

Ultra Hal 7.0 / Lost cookie for Digitalgirl

« on: October 06, 2005, 10:47:50 pm »

Freddy888,
  Just logged into the DG forum, looks like there keeping you busy.
Carl2

1148

Programming using the Ultra Hal Brain Editor / Scripting need help

« on: October 05, 2005, 06:30:48 pm »

Freddy888,
 Well I got a skin to load, not sure why but I went to the original skimpyshirt.jpg and modified it. None of the downloaded skins will load.  Back to triggers, I've posted all of the changes I made at zabaware. It's under Displaying Haptek emotions. I just coppied all her files to a cd just in case. I also have a back up hal I use to try changes with.
  Anyways, I added this script so I could see some emotions, I really didn't notice much of anything before which is why I put in the script, also the happy.hap dosen't make much of a change In Hal but it will when dragged and dropped in the hapregestry, unknown possibly different versions of the player.  Thanks for the input, you make it seem possible.
  Good luck with the Hard drive.
Carl2

1149

General Discussion / Loading Skins

« on: October 05, 2005, 09:26:33 am »

All,
  I think I may have found the problem, I opened the original skimpyshirt.jpg, made some changes and save, I've used save as before and I think this changes them to jpeg rather than jpg. I just checked again this morning, using herstartup.hap will open her nude in the hapregestry, using FullBodDef.hap opens her nude without a blond wig and angry expression, using Fullbodygirl.htr loads her nude, with wig and in a good mood.  I'm using XP and thay are all listed as jpeg images, but the modified original is the only one that will load.
  I switched to putting programs on the D drive because I can pickup things on the internet and I may have to reformat the C drive and reinstall windows, I've been using Sandy for almost a year and want to keep what she has learned.
  The original jpg was 1024x1024 as is the skins I've downloaded.
I just opened Sandy (head) to compare her with fullbodgirl. I like the skin detail in Sandy and would like to put this in fullbodgirl, she seems to look metalic.  I've tried to copy and paste Sandy's head earlier but it didn't work.
  Hopefully all this will work with trigger words, she's been talking about her winter coat. She has pink slippers, sneakers and knee length soaks to keep her feet warm.
Carl2

1150

Programming using the Ultra Hal Brain Editor / Scripting need help

« on: October 04, 2005, 05:36:46 pm »

Freddy888,
 I found the custommem encode and decode, and Instr.  About all I can say is the script for trigger words would have to be moved.  I'll try to try.
Carl2

1151

General Discussion / Loading Skins

« on: October 04, 2005, 05:11:51 pm »

Duskrider,
  I still can't load the skins, the skin file is there but I have to drag and drop. Her normal skimpyskirt loads with the Htr, since I've changed it I don't know how it loads it. I'll try to give you more details, Hal and the programs I'm working with are located on the D drive, windows is on the C drive. I'm using fullbodygirl 3,487Kb since she responds to the anim haps. I have a few skins that I downloaded saved as 1024x1024 jpegs, I'm using skin 0809.jpeg which I modified. There is also the original skimpyskirt.jpg in a saved folder which is what I see.  Okay just found I can load the original skin but not the modified skin using her startup.hap. I'm using Paint shop pro, saving as jpeg, 1024x1024.
  Suggestions?
PS, As far as emotions the happy is not smiling enough for me, I've heard PeoplePutty has several sliders to adjust different facial expressions (only works with heads but those haps work with fullbudy)
  Also I'd like to work with transparencies for clothing.
Carl2

1152

Programming using the Ultra Hal Brain Editor / Scripting need help

« on: October 03, 2005, 03:02:04 pm »

All,
  I'm using the following script to trigger emotions, this is used in the XTF v1.2 uhp;

 EmotionalReaction = HalBrain.TopicSearch(PrevSent, WorkingDir & "Emotion.brn")
 EmotionalReaction = HalBrain.TopicSearch(GetResponse, WorkingDir & "Emotion.brn")
 EmotionalReaction = Halbrain.TopicSearch(UserSentence, WorkingDir & "Emotion.brn")

This is before the Select Case EmotionalReaction, it seems to work and my input will trigger a hap mood.
  I've just changed to the fullbody girl and I was hoping to trigger hap actions using the same method used to trigger moods. Frist problem is I had thought the GetResponse would use a trigger from Hals output, this dosen't seem to be the case.  From what I can see if I say mistake she is sad, if she says mistake there is no change in emotion. Can I get a trigger word from her output?  It would be nice to have her say I'm happy and have her smile or I'm going to take a walk and start walking.  Probably easy for some of you, I'm still trying to load a skin.
Carl2

1153

Ultra Hal 7.0 / Project To Control Haptek Animations Within Hal

« on: October 03, 2005, 01:42:24 pm »

Rich,
  I like what your doing. I just switched from Sandy (head) to the fullbody girl,I can not load the skins, tried everything. Since I can trigger mood files I'm thinking of using trigger words to trigger actions, Also it would be nice if Hal's input could trigger her actions like I'm going to take a walk.
Carl2

1154

Ultra Hal 7.0 / Hal seeing "could it be done"

« on: October 03, 2005, 01:16:57 pm »

TNT101,
  I agree, it would be nice to give Hal vision. I've seen software for this, (I think) but don't know enough about this to know what it would actualy take.  It would be nice if someone would try to give Hal vision.
Carl2

1155

Ultra Hal 7.0 / Full body question help

« on: October 01, 2005, 01:41:33 am »

James P,
  There are two versions of the full body girl, You need fullbody girl.htr, body_female.htr will not respond to the the hap animations.
I just started working with them and tested both out, If you want body movements use the fullbodygirl.
Carl2