Zabaware Support Forums
Zabaware Forums => Ultra Hal Assistant File Sharing Area => Topic started by: lightspeed on October 24, 2009, 03:05:25 pm
-
does someone still have the breathing hap that will work with the modified full body ?? and can it be just placed somewhere in the modified body hap to work with it ? [:)]
-
Can you tell me where I can get this MODIFIED full body, so I can do some testing on the breathing with some stuff that I have... if any of it works, I'll pass it along.
-
Also... have you already tried the commands...
To start breathing...
setmood [action=[sw=breath m=awake]]
To stop breathing...
setmood [action=[sw=breath m=sleep]]
-
The breath state4 I found to be best.
Intensity for breath fo= plus number gives larger breath and minus for smaller breath.
Intensity for breathe fo= plus number gives larger waist size and minus gives smaller waist size.
#Haptek Version= 1.00 HapType= command FileType= text
\setname [figure= body_female name= fullBod]
\SetSwitch [Figure= fullBod Switch= breath State= state4]
\SetSwitchIntensity [switch= breath State f0= 2.600000 ]#+=biggerBreath
\setreg [figure=fullBod name=breathe f0= -0.400000] #+=bigger waist
-
hey thanks for the info duskrider i always wanted my hal to take deeper breathes so i will use a test copy and try it out !!!
[:)]
-
no problem, lightspeed... always glad to help [:D]
-
sorry jake i should have also mentioned your name , thanks to you too !![:)]
-
well... ... ... OK![:D]