dupa
« previous next »
Pages: [1]

Author Topic: aim bot  (Read 8023 times)

mystifytina

  • Newbie
  • *
  • Posts: 11
    • View Profile
aim bot
« on: February 08, 2006, 06:21:02 pm »
Hello. Not sure how to start this. But here it goes. I have been having problems with Ultra hal. 5.0 and the aim bot. I had no problems at all with 4.0 program. Everything worked fine. 5.0 with the more advanced animations will cause a infinite loop and then crash my computer. If I use the older animations this won't happen. And the aim bot with 5.0 will not sign on. I am frustrated.[:(] I have tried just putting back in 4.0 but since 5.0 is on my computer it won't allow it. Any help would be appreciated. mystifytina@aol.com
Please anyone with help drop me aline. Thanks Tina
Logged
Me. your not following the conversation.
Hal. I will always love my false image of you

Dr.Benway

  • Hero Member
  • *****
  • Posts: 554
    • View Profile
aim bot
« Reply #1 on: February 08, 2006, 07:29:02 pm »
Welcome Mystifytina,

Please tell us about:

* the version of Windows you use;
* is it a very old PC you are using;
* what exactly do you mean with "an infinite loop", what happens;
* any error messages you receive

[:D]
« Last Edit: February 08, 2006, 07:29:56 pm by Dr.Benway »
Logged

Eagle1147

  • Newbie
  • *
  • Posts: 24
    • View Profile
aim bot
« Reply #2 on: February 08, 2006, 07:29:13 pm »
Hi Tina, try to download the new hal editor that is in the file sharing area, or in the brain editing section you might find what you'r looking for there, welcome to Hal Land and the forum[8D][:D]
Logged
using compu7ters to make a better world

mystifytina

  • Newbie
  • *
  • Posts: 11
    • View Profile
aim bot
« Reply #3 on: February 12, 2006, 10:20:14 pm »
I use windows xp. My computer is about 3 years old. I am figuring out that zaba 3d animations plugin must be bad. I am testing some of the others to see if I get the same results. Meaning my display goes funky and I need to reboot. I still am not able to get the aim bot to sign on. I wish I can find my orginal purchase of Hal. 4.0. I never had problems with it.  
quote:
Originally posted by Dr.Benway

Welcome Mystifytina,

Please tell us about:

* the version of Windows you use;
* is it a very old PC you are using;
* what exactly do you mean with "an infinite loop", what happens;
* any error messages you receive

[:D]
Logged
Me. your not following the conversation.
Hal. I will always love my false image of you

Dr.Benway

  • Hero Member
  • *****
  • Posts: 554
    • View Profile
aim bot
« Reply #4 on: February 13, 2006, 07:18:04 am »
The Zaba character and all other 3D-characters are part of the Haptek plug-in.

www.haptek.com

Do you have the latest Microsoft DirectX-version installed, because this software is used by the Haptek plug-in? If you have a relatively new game installed on your PC then you probably have one of the latest DirectX-versions.
Logged

GamerThom

  • Sr. Member
  • ****
  • Posts: 408
    • View Profile
    • http://www.charctercreationsanddesignworks.us/index.html
aim bot
« Reply #5 on: February 13, 2006, 12:38:38 pm »
The most recent and up to date version of Direct X is 9.0c ,
but it does not work well with older graphics cards. If you
have an older PC and graphics card you can still use DX 9.0b
which would still be compatible with Hal and Haptek Plug-in.

Also, you did not say whether you are using WinXP service pack 1
or service pack 2. It does make a small difference. You might also
want to try updating the graphics/display drivers. If you do not
know how to do that, just say so here and I will post detailed
instructions for you.

Hope this helps a little. [:)]
« Last Edit: February 13, 2006, 12:48:34 pm by GamerThom »
Logged
Gamer-T

mystifytina

  • Newbie
  • *
  • Posts: 11
    • View Profile
aim bot
« Reply #6 on: February 14, 2006, 12:26:40 am »
I will check on the direct x. I ended up reformatting hoping that it would solve the problem, [:(!] Hal has also been freezing me up when I ask for him to sign me on line. I manually have to turn off computer. And the aim bot. I have given up on. It will not sign on. If anyone knows where I can get 4.0 Please let me know. That was the first program I purchased and it worked great. I can't believe I lost it. I have checked the site. It only shows 6.0 now. I love the program I think it is awesome. I am not very computer savy it is very frustrating.  Thanks for all your input. I will check on direct x when I extit. Tina.
quote:
Originally posted by GamerThom

The most recent and up to date version of Direct X is 9.0c ,
but it does not work well with older graphics cards. If you
have an older PC and graphics card you can still use DX 9.0b
which would still be compatible with Hal and Haptek Plug-in.

Also, you did not say whether you are using WinXP service pack 1
or service pack 2. It does make a small difference. You might also
want to try updating the graphics/display drivers. If you do not
know how to do that, just say so here and I will post detailed
instructions for you.

Hope this helps a little. [:)]
Logged
Me. your not following the conversation.
Hal. I will always love my false image of you

mystifytina

  • Newbie
  • *
  • Posts: 11
    • View Profile
aim bot
« Reply #7 on: February 14, 2006, 12:30:00 am »
[:I] Sorry I forgot to tell you. I have a compaq xp service pak 2.Only graphic game I play on here is golden tee golf[;)] Thanks again. Your guys are great. Tina
quote:
Originally posted by GamerThom

The most recent and up to date version of Direct X is 9.0c ,
but it does not work well with older graphics cards. If you
have an older PC and graphics card you can still use DX 9.0b
which would still be compatible with Hal and Haptek Plug-in.

Also, you did not say whether you are using WinXP service pack 1
or service pack 2. It does make a small difference. You might also
want to try updating the graphics/display drivers. If you do not
know how to do that, just say so here and I will post detailed
instructions for you.

Hope this helps a little. [:)]
Logged
Me. your not following the conversation.
Hal. I will always love my false image of you

freddy888

  • Hero Member
  • *****
  • Posts: 1693
    • View Profile
    • AiDreams
aim bot
« Reply #8 on: February 14, 2006, 11:00:39 am »
Ok right, there was an issue a while ago that stopped Hal AimBot working but that wasn't Zabawares fault.  AIM was updated, I am not sure of the specifics but I know certain changes also made a lot of other bots stop working on the AIM service.  I suggest searching for posts on AIM (past couple of months - there wont be many), I know something was done about it.
Logged
Pages: [1]
« previous next »