Author Topic: <AUTO>30000</AUTO>  (Read 1777 times)

Bill819

  • Hero Member
  • *****
  • Posts: 1483
    • View Profile
<AUTO>30000</AUTO>
« on: November 19, 2004, 12:28:31 pm »
I finally got the program to work once again. I set the response time to 10000 (ten seconds) and it just kept spitting out responses. Finally I said good bye and shut it down only to have it restart itself 10 seconds later say why are your repeating yourself. This happened over and over again until I took Hal off my start up bar.
Even telling Hal to AUTOOFF did not stop the thing from doing its thing. I don't know what is different, but now the program acts like it's alive. You shut it down and it restarts itself. If we could only force it do or think something different each time.
I am now going to try to force it to be an entertainer if I can. By that I mean alternate between telling jokes and/or singing some songs.
Bill
 

vonsmith

  • Hero Member
  • *****
  • Posts: 602
    • View Profile
<AUTO>30000</AUTO>
« Reply #1 on: November 19, 2004, 01:17:46 pm »
Bill819,
Sounds like your Hal has a Michael Moore thing going on. He's is annoying, doesn't pay attention to anything anyone says, and refuses to be shut down. [:D]


=vonsmith=
 

Bill819

  • Hero Member
  • *****
  • Posts: 1483
    • View Profile
<AUTO>30000</AUTO>
« Reply #2 on: November 19, 2004, 01:22:02 pm »
quote:
Originally posted by vonsmith

Bill819,
Sounds like your Hal has a Michael Moore thing going on. He's is annoying, doesn't pay attention to anything anyone says, and refuses to be shut down. [:D]
=vonsmith=


I also downloaded you new brain and installed it. Works real nice. Did a major print out this morning, (don't tell my boss) and intend to study it very closely. Want to practice some brain-surgery. Will make plenty of backups first.
Bill [:p]
 

vonsmith

  • Hero Member
  • *****
  • Posts: 602
    • View Profile
<AUTO>30000</AUTO>
« Reply #3 on: November 19, 2004, 02:04:31 pm »
Bill819,
I assume you are referring to the XTF Brain v1.2.

Here are the steps to install the XTF Brain.

Download and follow the included instructions to install the XTF Brain v1.0 here:
http://www.ultrahal.com/files/type.asp?iType=12

Then install the XTF Brain v1.2 Update Patch as shown here:
http://www.zabaware.com/forum/topic.asp?TOPIC_ID=1233

Then follow the instructions here to rename a file:
http://www.zabaware.com/forum/topic.asp?TOPIC_ID=1237

Remember to select the XTF Brain in Hal's Menu.

Sorry for the three step installation.


=vonsmith=