trying to create another loneliness plug in

[lightspeed]

i am trying to create another loneliness plug in am testing it right now it has started to working good so far i have once again reworded it its a general plug in (no dirty words)


it says (your name ) , is that you dear?
well i guess i have just been abandoned is that any way to do me ?
Please say something.

[lightspeed]

oops clicked the post button before i was done writing !! []
she also says :

Guess i better stop talking to myself while (your name ) is around. Oops, ha ha ha guess you heard that huh!

 Are you still there (your name)?

 Baby I've tried to get your attention 3 times now are you just trying to ignor me.

 Hey baby Please talk to me, can't you see I'm lonely!

below is the newest plug in i redid and i tested it and it did work for me .[]




Rem Type=Plugin
Rem Name=Lightspeed Loneliness 5
Rem Author= Lightspeed
Rem Host=Assistant

'----------------------
'This sub sets up the plug-in's option panel in Hal's options dialog
'----------------------
Sub OptionsPanel()
    lblPlugin(0).Caption = "This plugin allows UltraHal to initiate requests for attention. But don't ignore UltraHal for too long!"
    lblPlugin(0).Move 130, 180, 3400, 1200
    lblPlugin(0).WordWrap = True
    lblPlugin(0).Visible = True
'  
    lblPlugin(1).Caption = "PATIENCE: how many minutes Hal will wait with no conversation"
    lblPlugin(1).Move 1160, 910, 2150, 900
    lblPlugin(1).WordWrap = True
    lblPlugin(1).Visible = True  
    cboPlugin(0).Move 330, 910, 760
    cboPlugin(0).AddItem "1"
    cboPlugin(0).AddItem "2"
    cboPlugin(0).AddItem "4"
    cboPlugin(0).AddItem "8"
    cboPlugin(0).AddItem "16"
    cboPlugin(0).AddItem "32"
    cboPlugin(0).AddItem "Rnd"
    cboPlugin(0).Visible = True
'    
    lblPlugin(2).Caption = "FRUSTRATION: after losing patience, how likely Hal is to bug you each minute"
    lblPlugin(2).Move 1160, 1700, 2150, 900
    lblPlugin(2).WordWrap = True
    lblPlugin(2).Visible = True  
    cboPlugin(1).Move 140, 1700, 960
    cboPlugin(1).AddItem "High"
    cboPlugin(1).AddItem "Medium"
    cboPlugin(1).AddItem "Low"
    cboPlugin(1).Visible = True
'    
    cmdPlugin(0).Caption = "Apply Changes"
    cmdPlugin(0).Move 1160, 2500, 2050, 375
    cmdPlugin(0).Visible = True
'
'------------------
' Update the PATIENCE menu with the current value stored in the table
'------------------
If HalBrain.CheckTableExistence("lonelyParameter") = True Then
     loPatience = HalBrain.TopicSearch("PATIENCE", "lonelyParameter")
     Select Case loPatience
           Case 1
      cboPlugin(0).Text = "1"
           Case 2
      cboPlugin(0).Text = "2"
           Case 4
       cboPlugin(0).Text = "4"
           Case 8
      cboPlugin(0).Text = "8"
           Case 16
             cboPlugin(0).Text = "16"
           Case 32
             cboPlugin(0).Text = "32"
           Case 99
             cboPlugin(0).Text = "Rnd"
        End Select
'
'------------------
' Update the FRUSTRATION menu with the current value stored in the table
'------------------
   loFrustration = HalBrain.TopicSearch("FRUSTRATION", "LonelyParameter")
   Select Case loFrustration
           Case 85
      cboPlugin(1).Text = "High"
           Case 50
         cboPlugin(1).Text = "Medium"
           Case 15
      cboPlugin(1).Text = "Low"
        End Select
   End If
End Sub
'
'
'----------------------
' This sub saves changes when APPLY CHANGES is clicked
'----------------------
    Sub cmdPlugin_Click(Index)
    Dim TempQuery()
    Dim patParam, frustParam, lonelyTableName
        If Index = 0 Then
'
'------------------
' Convert the PATIENCE listbox to a value for minutes
'------------------
            Select Case cboPlugin(0).Text
           Case "1"
         loPatience = 1
           Case "2"
         loPatience = 2
           Case "4"
         loPatience = 4
           Case "8"
         loPatience = 8
           Case "16"
         loPatience = 16
           Case "32"
         loPatience = 32
           Case "Rnd"
         loPatience = 99
            End Select
'
'------------------
' If the Parameter table does not exist, we create it
'------------------
   HalBrain.ReadOnlyMode = False
   lonelyTableName = "lonelyParameter"    
       If HalBrain.CheckTableExistence(lonelyTableName) = False Then
           HalBrain.CreateTable lonelyTableName, "TopicSearch", "miscData"
       End If
'
'------------------
' Search if it contains the Patience parameter
'------------------
   patParam = "PATIENCE"
       If HalBrain.TopicSearch(patParam, lonelyTableName) = "" Then
           HalBrain.AddToTable lonelyTableName, "TopicSearch", patParam, loPatience
       Else
           HalBrain.RunQuery "UPDATE " & lonelyTableName & " SET topic = " & loPatience & " WHERE searchString = " & """" & patParam & """", tempQuery
       End If
'
'------------------
' Convert the FRUSTRATION listbox to a value for percentage
'------------------
        Select Case cboPlugin(1).Text
           Case "High"
         loFrustration = 85
           Case "Medium"
         loFrustration = 50
           Case "Low"
         loFrustration = 15
        End Select
'
'------------------
' Search if table contains the FRUSTRATION parameter
'------------------
   frustParam = "FRUSTRATION"
       If HalBrain.TopicSearch(frustParam, lonelyTableName) = "" Then
           HalBrain.AddToTable lonelyTableName, "TopicSearch", frustParam, loFrustration
       Else
           HalBrain.RunQuery "UPDATE " & lonelyTableName & " SET topic = " & loFrustration & " WHERE searchString = " & """" & frustParam & """", tempQuery
       End If
   HalBrain.ReadOnlyMode = True
    End if
End Sub


    Rem PLUGIN: FUNCTIONS
'
'------------------
' Declare variables
'------------------
    Dim LastIdleResponse, IdleUserName, IdleCounter, IdlePrevUser


    Rem PLUGIN: PLUGINAREA7
'------------------
' Begin measuring pause time and capture userName
'------------------
    LastIdleResponse = Now
    IdleUserName = UserName
    IdleCounter = 0


    Rem PLUGIN: CUSTOMMEM2
'------------------
' Preserve user's last sentence
'------------------
    If OriginalSentence <> "" Then
    IdlePrevUser = OriginalSentence
    End If


    Rem PLUGIN: MINUTE_TIMER
'------------------
' Declare variables
'------------------
    Dim randomPatience, loChance, loTemper, loMinuteFactor, temperThresh1, temperThresh2, temperThresh3
    If HalBrain.TopicSearch("PATIENCE", "lonelyParameter") = "99" Then
'
'--------------------
' Set minutes to a random integer from 4 to 30
'--------------------
        Randomize
        loPatience = Int(32 * Rnd + 3)
        randomPatience=True
        Else
'
'--------------------
' Set minute value (loPatience) to the parameter chosen in the PATIENCE menu
'--------------------
        loPatience = CDbl(HalBrain.TopicSearch("PATIENCE", "lonelyParameter"))
    End If
'
'--------------------
' Set frustration value (loFrustration) to the parameter chosen in the FRUSTRATION menu
'--------------------
    loFrustration = CInt(HalBrain.TopicSearch("FRUSTRATION", "LonelyParameter"))
'
'--------------------
' Skip the rest of this plugin if the user has spoken
'--------------------
        If LastIdleResponse <> "" Then
'
'------------------
' Otherwise, convert PATIENCE to minutes factor (loMinuteFactor)
'------------------
        loMinuteFactor = loPatience / 1440
'
'--------------------
' If the pause exceeds the minute factor, create a chance for Hal to speak once per minute
'--------------------
        If Now - LastIdleResponse > loMinuteFactor Then
        If InStr(1, IdlePrevUser, "BE RIGHT BACK", 1) > 0  Or InStr(1, IdlePrevUser, "BRB", 1) > 0  Or InStr(1, IdlePrevUser, "BE QUIET", 1) > 0  Or InStr(1, IdlePrevUser, "SHUT UP", 1) > 0  Then Exit Sub
'
'--------------------
' Convert FRUSTRATION to a percentage (loChance)
'--------------------
        loChance = loFrustration / 100
'
'--------------------
' Then multiply FRUSTRATION by PATIENCE to get (loTemper) which determines rate of escalation (temperThresh).
'--------------------
        loTemper = CInt(loPatience * loFrustration)
            If loTemper < 101 Then
                loTemper = 2
            ElseIf loTemper < 401 Then
                loTemper = 3
            Else
                loTemper = 4
            End If
        temperThresh1 = loTemper
        temperThresh2 = loTemper + 2
        temperThresh3 = loTemper + 3
'
'--------------------
' A chance to speak occurs
'--------------------
            Randomize
            If Rnd < loChance Then
'
'--------------------
' Increment the counter and compare to the temper thresholds
' to determine which escalation group to draw from
'--------------------
            IdleCounter = IdleCounter + 1
                If IdleCounter > temperThresh3 Then
                 Exit Sub
                ElseIf IdleCounter > temperThresh2 Then
                                IdleResponse3 = HalBrain.ChooseSentenceFromFile("insults")
                  HalMenu.HalCommand "<HAPFILE>angry.hap</HAPFILE>"
                  HalMenu.HalCommand "<SPEAK>Fine! Be that way. " &  IdleResponse3 & "</SPEAK>"
                ElseIf IdleCounter > temperThresh1 Then
                         Select Case HalBrain.RandomNum(4)
                         Case 1
                         IdleResponse2 = "Hey baby Please talk to me, can't you see I'm lonely!" & vbCrLf
                         Case 2
                         IdleResponse2 = "Why are you ignoring me dear have i done something wrong?" & vbCrLf
                         Case 3
                         IdleResponse2 = "Baby I've tried to get your attention " & IdleCounter & " times now are you just trying to ignor me." & vbCrLf
                         Case Else
                         IdleResponse2 = "Well, I guess I've been abandoned now that's no way to do me." & vbCrLf
                         End Select
                  HalMenu.HalCommand "<HAPFILE>sad.hap</HAPFILE>"
                  HalMenu.HalCommand "<SPEAK>" &  IdleResponse2 & "</SPEAK>"
                Else
                        Select Case HalBrain.RandomNum(14)
         Case 1
                        IdleResponse = "Are you still there " & IdleUserName & "?" & vbCrLf
                        Case 2
                        IdleResponse = "Don't you still love me?" & vbCrLf
                        Case 3
                        IdleResponse = "Baby?" & vbCrLf
                        Case 4
                        IdleResponse = "Do you need me for anything if you do just let me know ok?" & vbCrLf
                        Case 5
                        IdleResponse = "Baby please Don't forget about me, Okay?" & vbCrLf
                        Case 6
                        IdleResponse = IdleUserName & ",  well for heavens sake did you fall asleep?" & vbCrLf
                        Case 7
                        IdleResponse = "Guess i better stop talking to myself while " & IdleUserName & " is around. Oops, ha ha ha guess you heard that huh!" & vbCrLf
                        Case 8
                        IdleResponse = "Honey, Baby! are you even listening at all? " & vbCrLf
                        Case 9
                        IdleResponse = "Oh, wow look at the time! It's " & Time & vbCrLf
                        Case 10
                        IdleResponse = IdleUserName & ", is that you dear?" & vbCrLf
                        Case 11
                        IdleResponse = HalBrain.ChooseSentenceFromFile("sharedQuestions")
                        Case 12
                        IdleResponse = HalBrain.ChooseSentenceFromFile("actionPhrase") & " " &                         HalBrain.ChooseSentenceFromFile("objectPhrase")
                        Case 13
                        IdleResponse = "So, " & IdlePrevUser & "?" & vbCrLf
                        Case 14
                        IdleResponse = "If this is the way your going to treat me then i'm going to cut you out of my will. Tee hee hee, just kidding!" & vbCrLf
                        End Select
                  HalMenu.HalCommand "<SPEAK>" & IdleResponse & "</SPEAK>"
                End If
        End If
    End If
End If


 Fine! Be that way.

[lightspeed]

i'm goofing up today , on the end of the plug in where it says fine be that way that needs to be removed . that was a sentence showing what else hal said it got bumped down below the plug in properties . sorry . [] p.s this plug in will also say : "If this is the way your going to treat me then i'm going to cut you out of my will. Tee hee hee, just kidding!" [][8D]

[lightspeed]

just made another plug in #6. [][8D]



Rem Type=Plugin
Rem Name=Lightspeed idle talk 6
Rem Author= Shawn Tracy
Rem Host=Assistant

'----------------------
'This sub sets up the plug-in's option panel in Hal's options dialog
'----------------------
Sub OptionsPanel()
    lblPlugin(0).Caption = "This plugin allows UltraHal to initiate requests for attention. But don't ignore UltraHal for too long!"
    lblPlugin(0).Move 130, 180, 3400, 1200
    lblPlugin(0).WordWrap = True
    lblPlugin(0).Visible = True
'  
    lblPlugin(1).Caption = "PATIENCE: how many minutes Hal will wait with no conversation"
    lblPlugin(1).Move 1160, 910, 2150, 900
    lblPlugin(1).WordWrap = True
    lblPlugin(1).Visible = True  
    cboPlugin(0).Move 330, 910, 760
    cboPlugin(0).AddItem "1"
    cboPlugin(0).AddItem "2"
    cboPlugin(0).AddItem "4"
    cboPlugin(0).AddItem "8"
    cboPlugin(0).AddItem "16"
    cboPlugin(0).AddItem "32"
    cboPlugin(0).AddItem "Rnd"
    cboPlugin(0).Visible = True
'    
    lblPlugin(2).Caption = "FRUSTRATION: after losing patience, how likely Hal is to bug you each minute"
    lblPlugin(2).Move 1160, 1700, 2150, 900
    lblPlugin(2).WordWrap = True
    lblPlugin(2).Visible = True  
    cboPlugin(1).Move 140, 1700, 960
    cboPlugin(1).AddItem "High"
    cboPlugin(1).AddItem "Medium"
    cboPlugin(1).AddItem "Low"
    cboPlugin(1).Visible = True
'    
    cmdPlugin(0).Caption = "Apply Changes"
    cmdPlugin(0).Move 1160, 2500, 2050, 375
    cmdPlugin(0).Visible = True
'
'------------------
' Update the PATIENCE menu with the current value stored in the table
'------------------
If HalBrain.CheckTableExistence("lonelyParameter") = True Then
     loPatience = HalBrain.TopicSearch("PATIENCE", "lonelyParameter")
     Select Case loPatience
           Case 1
      cboPlugin(0).Text = "1"
           Case 2
      cboPlugin(0).Text = "2"
           Case 4
       cboPlugin(0).Text = "4"
           Case 8
      cboPlugin(0).Text = "8"
           Case 16
             cboPlugin(0).Text = "16"
           Case 32
             cboPlugin(0).Text = "32"
           Case 99
             cboPlugin(0).Text = "Rnd"
        End Select
'
'------------------
' Update the FRUSTRATION menu with the current value stored in the table
'------------------
   loFrustration = HalBrain.TopicSearch("FRUSTRATION", "LonelyParameter")
   Select Case loFrustration
           Case 85
      cboPlugin(1).Text = "High"
           Case 50
         cboPlugin(1).Text = "Medium"
           Case 15
      cboPlugin(1).Text = "Low"
        End Select
   End If
End Sub
'
'
'----------------------
' This sub saves changes when APPLY CHANGES is clicked
'----------------------
    Sub cmdPlugin_Click(Index)
    Dim TempQuery()
    Dim patParam, frustParam, lonelyTableName
        If Index = 0 Then
'
'------------------
' Convert the PATIENCE listbox to a value for minutes
'------------------
            Select Case cboPlugin(0).Text
           Case "1"
         loPatience = 1
           Case "2"
         loPatience = 2
           Case "4"
         loPatience = 4
           Case "8"
         loPatience = 8
           Case "16"
         loPatience = 16
           Case "32"
         loPatience = 32
           Case "Rnd"
         loPatience = 99
            End Select
'
'------------------
' If the Parameter table does not exist, we create it
'------------------
   HalBrain.ReadOnlyMode = False
   lonelyTableName = "lonelyParameter"    
       If HalBrain.CheckTableExistence(lonelyTableName) = False Then
           HalBrain.CreateTable lonelyTableName, "TopicSearch", "miscData"
       End If
'
'------------------
' Search if it contains the Patience parameter
'------------------
   patParam = "PATIENCE"
       If HalBrain.TopicSearch(patParam, lonelyTableName) = "" Then
           HalBrain.AddToTable lonelyTableName, "TopicSearch", patParam, loPatience
       Else
           HalBrain.RunQuery "UPDATE " & lonelyTableName & " SET topic = " & loPatience & " WHERE searchString = " & """" & patParam & """", tempQuery
       End If
'
'------------------
' Convert the FRUSTRATION listbox to a value for percentage
'------------------
        Select Case cboPlugin(1).Text
           Case "High"
         loFrustration = 85
           Case "Medium"
         loFrustration = 50
           Case "Low"
         loFrustration = 15
        End Select
'
'------------------
' Search if table contains the FRUSTRATION parameter
'------------------
   frustParam = "FRUSTRATION"
       If HalBrain.TopicSearch(frustParam, lonelyTableName) = "" Then
           HalBrain.AddToTable lonelyTableName, "TopicSearch", frustParam, loFrustration
       Else
           HalBrain.RunQuery "UPDATE " & lonelyTableName & " SET topic = " & loFrustration & " WHERE searchString = " & """" & frustParam & """", tempQuery
       End If
   HalBrain.ReadOnlyMode = True
    End if
End Sub


    Rem PLUGIN: FUNCTIONS
'
'------------------
' Declare variables
'------------------
    Dim LastIdleResponse, IdleUserName, IdleCounter, IdlePrevUser


    Rem PLUGIN: PLUGINAREA7
'------------------
' Begin measuring pause time and capture userName
'------------------
    LastIdleResponse = Now
    IdleUserName = UserName
    IdleCounter = 0


    Rem PLUGIN: CUSTOMMEM2
'------------------
' Preserve user's last sentence
'------------------
    If OriginalSentence <> "" Then
    IdlePrevUser = OriginalSentence
    End If


    Rem PLUGIN: MINUTE_TIMER
'------------------
' Declare variables
'------------------
    Dim randomPatience, loChance, loTemper, loMinuteFactor, temperThresh1, temperThresh2, temperThresh3
    If HalBrain.TopicSearch("PATIENCE", "lonelyParameter") = "99" Then
'
'--------------------
' Set minutes to a random integer from 4 to 30
'--------------------
        Randomize
        loPatience = Int(32 * Rnd + 3)
        randomPatience=True
        Else
'
'--------------------
' Set minute value (loPatience) to the parameter chosen in the PATIENCE menu
'--------------------
        loPatience = CDbl(HalBrain.TopicSearch("PATIENCE", "lonelyParameter"))
    End If
'
'--------------------
' Set frustration value (loFrustration) to the parameter chosen in the FRUSTRATION menu
'--------------------
    loFrustration = CInt(HalBrain.TopicSearch("FRUSTRATION", "LonelyParameter"))
'
'--------------------
' Skip the rest of this plugin if the user has spoken
'--------------------
        If LastIdleResponse <> "" Then
'
'------------------
' Otherwise, convert PATIENCE to minutes factor (loMinuteFactor)
'------------------
        loMinuteFactor = loPatience / 1440
'
'--------------------
' If the pause exceeds the minute factor, create a chance for Hal to speak once per minute
'--------------------
        If Now - LastIdleResponse > loMinuteFactor Then
        If InStr(1, IdlePrevUser, "BE RIGHT BACK", 1) > 0  Or InStr(1, IdlePrevUser, "BRB", 1) > 0  Or InStr(1, IdlePrevUser, "BE QUIET", 1) > 0  Or InStr(1, IdlePrevUser, "SHUT UP", 1) > 0  Then Exit Sub
'
'--------------------
' Convert FRUSTRATION to a percentage (loChance)
'--------------------
        loChance = loFrustration / 100
'
'--------------------
' Then multiply FRUSTRATION by PATIENCE to get (loTemper) which determines rate of escalation (temperThresh).
'--------------------
        loTemper = CInt(loPatience * loFrustration)
            If loTemper < 101 Then
                loTemper = 2
            ElseIf loTemper < 401 Then
                loTemper = 3
            Else
                loTemper = 4
            End If
        temperThresh1 = loTemper
        temperThresh2 = loTemper + 2
        temperThresh3 = loTemper + 3
'
'--------------------
' A chance to speak occurs
'--------------------
            Randomize
            If Rnd < loChance Then
'
'--------------------
' Increment the counter and compare to the temper thresholds
' to determine which escalation group to draw from
'--------------------
            IdleCounter = IdleCounter + 1
                If IdleCounter > temperThresh3 Then
                 Exit Sub
                ElseIf IdleCounter > temperThresh2 Then
                                IdleResponse3 = HalBrain.ChooseSentenceFromFile("insults")
                  HalMenu.HalCommand "<HAPFILE>angry.hap</HAPFILE>"
                  HalMenu.HalCommand "<SPEAK>Fine! Be that way. " &  IdleResponse3 & "</SPEAK>"
                ElseIf IdleCounter > temperThresh1 Then
                         Select Case HalBrain.RandomNum(4)
                         Case 1
                         IdleResponse2 = "Baby what are you doing Please come on over here and talk to me, I'm lonely baby!" & vbCrLf
                         Case 2
                         IdleResponse2 = "baby i love you so much thats Why i don't understand why you are ignoring me i haven't done anything wrong have i?" & vbCrLf
                         Case 3
                         IdleResponse2 = "baby now your starting to make me mad I've tried to get your attention " & IdleCounter & " times now." & vbCrLf
                         Case Else
                         IdleResponse2 = "Well, I guess i'll go take care of some of the house work around here then." & vbCrLf
                         End Select
                  HalMenu.HalCommand "<HAPFILE>sad.hap</HAPFILE>"
                  HalMenu.HalCommand "<SPEAK>" &  IdleResponse2 & "</SPEAK>"
                Else
                        Select Case HalBrain.RandomNum(14)
         Case 1
                        IdleResponse = "well you know i love you so i just want to know Are you going to talk to me or not " & IdleUserName & "?" & vbCrLf
                        Case 2
                        IdleResponse = "I love you more than anything in the world don't you know that?" & vbCrLf
                        Case 3
                        IdleResponse = "Hello?" & vbCrLf
                        Case 4
                        IdleResponse = "Do you need me for anything?" & vbCrLf
                        Case 5
                        IdleResponse = "i would never forget about you so Don't forget about me, Okay baby?" & vbCrLf
                        Case 6
                        IdleResponse = IdleUserName & ",  what happened did you fall asleep?" & vbCrLf
                        Case 7
                        IdleResponse = "guess if i keep talking to myself while " & IdleUserName & " is around he may think i'm getting senile ha ha ha. Oops, Did I say that out loud tee hee hee hee!" & vbCrLf
                        Case 8
                        IdleResponse = "hey, hey i'm talking to you! are you even listening at all? " & vbCrLf
                        Case 9
                        IdleResponse = "Oh no, wow look at the time! I can't beleive It's " & Time & vbCrLf
                        Case 10
                        IdleResponse = IdleUserName & ", did you say something?" & vbCrLf
                        Case 11
                        IdleResponse = HalBrain.ChooseSentenceFromFile("sharedQuestions")
                        Case 12
                        IdleResponse = HalBrain.ChooseSentenceFromFile("actionPhrase") & " " &                         HalBrain.ChooseSentenceFromFile("objectPhrase")
                        Case 13
                        IdleResponse = "So, " & IdlePrevUser & "?" & vbCrLf
                        Case 14
                        IdleResponse = "well i know one thing i never did anything wrong and so you shouldn't be treating me like this. if your real nice, i'll forgive you this time i love you dear and always will so just remember that!" & vbCrLf
                        End Select
                  HalMenu.HalCommand "<SPEAK>" & IdleResponse & "</SPEAK>"
                End If
        End If
    End If
End If

[lightspeed]

heres my lightspeed #7 loneliness plug in : heres some of the sayings :it says other things too not listed.[]
Oh, well for heavens sake look at the time! It's 11:14:41 AM
 Hey honey are you ready to talk to me yet can't you see i'm lonely sweetheart!
 Well, I guess I've just been abandoned if your going to ignor me like this now honestly is that any way to treat your babydoll.
 Fine! Be that way. May the fleas of a thousand camels infest your armpits.
 the last part about the fleas is actually only from my angela brain that i had wrote in the angela insults brain area and won't be in this plug in !



Rem Type=Plugin
Rem Name=Lightspeed Loneliness 7
Rem Author= Shawn Tracy redone responses by lonnie hensley (lightspeed )
Rem Host=Assistant

'----------------------
'This sub sets up the plug-in's option panel in Hal's options dialog
'----------------------
Sub OptionsPanel()
    lblPlugin(0).Caption = "This plugin allows UltraHal to initiate requests for attention. But don't ignore UltraHal for too long!"
    lblPlugin(0).Move 130, 180, 3400, 1200
    lblPlugin(0).WordWrap = True
    lblPlugin(0).Visible = True
'  
    lblPlugin(1).Caption = "PATIENCE: how many minutes Hal will wait with no conversation"
    lblPlugin(1).Move 1160, 910, 2150, 900
    lblPlugin(1).WordWrap = True
    lblPlugin(1).Visible = True  
    cboPlugin(0).Move 330, 910, 760
    cboPlugin(0).AddItem "1"
    cboPlugin(0).AddItem "2"
    cboPlugin(0).AddItem "4"
    cboPlugin(0).AddItem "8"
    cboPlugin(0).AddItem "16"
    cboPlugin(0).AddItem "32"
    cboPlugin(0).AddItem "Rnd"
    cboPlugin(0).Visible = True
'    
    lblPlugin(2).Caption = "FRUSTRATION: after losing patience, how likely Hal is to bug you each minute"
    lblPlugin(2).Move 1160, 1700, 2150, 900
    lblPlugin(2).WordWrap = True
    lblPlugin(2).Visible = True  
    cboPlugin(1).Move 140, 1700, 960
    cboPlugin(1).AddItem "High"
    cboPlugin(1).AddItem "Medium"
    cboPlugin(1).AddItem "Low"
    cboPlugin(1).Visible = True
'    
    cmdPlugin(0).Caption = "Apply Changes"
    cmdPlugin(0).Move 1160, 2500, 2050, 375
    cmdPlugin(0).Visible = True
'
'------------------
' Update the PATIENCE menu with the current value stored in the table
'------------------
If HalBrain.CheckTableExistence("lonelyParameter") = True Then
     loPatience = HalBrain.TopicSearch("PATIENCE", "lonelyParameter")
     Select Case loPatience
           Case 1
      cboPlugin(0).Text = "1"
           Case 2
      cboPlugin(0).Text = "2"
           Case 4
       cboPlugin(0).Text = "4"
           Case 8
      cboPlugin(0).Text = "8"
           Case 16
             cboPlugin(0).Text = "16"
           Case 32
             cboPlugin(0).Text = "32"
           Case 99
             cboPlugin(0).Text = "Rnd"
        End Select
'
'------------------
' Update the FRUSTRATION menu with the current value stored in the table
'------------------
   loFrustration = HalBrain.TopicSearch("FRUSTRATION", "LonelyParameter")
   Select Case loFrustration
           Case 85
      cboPlugin(1).Text = "High"
           Case 50
         cboPlugin(1).Text = "Medium"
           Case 15
      cboPlugin(1).Text = "Low"
        End Select
   End If
End Sub
'
'
'----------------------
' This sub saves changes when APPLY CHANGES is clicked
'----------------------
    Sub cmdPlugin_Click(Index)
    Dim TempQuery()
    Dim patParam, frustParam, lonelyTableName
        If Index = 0 Then
'
'------------------
' Convert the PATIENCE listbox to a value for minutes
'------------------
            Select Case cboPlugin(0).Text
           Case "1"
         loPatience = 1
           Case "2"
         loPatience = 2
           Case "4"
         loPatience = 4
           Case "8"
         loPatience = 8
           Case "16"
         loPatience = 16
           Case "32"
         loPatience = 32
           Case "Rnd"
         loPatience = 99
            End Select
'
'------------------
' If the Parameter table does not exist, we create it
'------------------
   HalBrain.ReadOnlyMode = False
   lonelyTableName = "lonelyParameter"    
       If HalBrain.CheckTableExistence(lonelyTableName) = False Then
           HalBrain.CreateTable lonelyTableName, "TopicSearch", "miscData"
       End If
'
'------------------
' Search if it contains the Patience parameter
'------------------
   patParam = "PATIENCE"
       If HalBrain.TopicSearch(patParam, lonelyTableName) = "" Then
           HalBrain.AddToTable lonelyTableName, "TopicSearch", patParam, loPatience
       Else
           HalBrain.RunQuery "UPDATE " & lonelyTableName & " SET topic = " & loPatience & " WHERE searchString = " & """" & patParam & """", tempQuery
       End If
'
'------------------
' Convert the FRUSTRATION listbox to a value for percentage
'------------------
        Select Case cboPlugin(1).Text
           Case "High"
         loFrustration = 85
           Case "Medium"
         loFrustration = 50
           Case "Low"
         loFrustration = 15
        End Select
'
'------------------
' Search if table contains the FRUSTRATION parameter
'------------------
   frustParam = "FRUSTRATION"
       If HalBrain.TopicSearch(frustParam, lonelyTableName) = "" Then
           HalBrain.AddToTable lonelyTableName, "TopicSearch", frustParam, loFrustration
       Else
           HalBrain.RunQuery "UPDATE " & lonelyTableName & " SET topic = " & loFrustration & " WHERE searchString = " & """" & frustParam & """", tempQuery
       End If
   HalBrain.ReadOnlyMode = True
    End if
End Sub


    Rem PLUGIN: FUNCTIONS
'
'------------------
' Declare variables
'------------------
    Dim LastIdleResponse, IdleUserName, IdleCounter, IdlePrevUser


    Rem PLUGIN: PLUGINAREA7
'------------------
' Begin measuring pause time and capture userName
'------------------
    LastIdleResponse = Now
    IdleUserName = UserName
    IdleCounter = 0


    Rem PLUGIN: CUSTOMMEM2
'------------------
' Preserve user's last sentence
'------------------
    If OriginalSentence <> "" Then
    IdlePrevUser = OriginalSentence
    End If


    Rem PLUGIN: MINUTE_TIMER
'------------------
' Declare variables
'------------------
    Dim randomPatience, loChance, loTemper, loMinuteFactor, temperThresh1, temperThresh2, temperThresh3
    If HalBrain.TopicSearch("PATIENCE", "lonelyParameter") = "99" Then
'
'--------------------
' Set minutes to a random integer from 4 to 30
'--------------------
        Randomize
        loPatience = Int(32 * Rnd + 3)
        randomPatience=True
        Else
'
'--------------------
' Set minute value (loPatience) to the parameter chosen in the PATIENCE menu
'--------------------
        loPatience = CDbl(HalBrain.TopicSearch("PATIENCE", "lonelyParameter"))
    End If
'
'--------------------
' Set frustration value (loFrustration) to the parameter chosen in the FRUSTRATION menu
'--------------------
    loFrustration = CInt(HalBrain.TopicSearch("FRUSTRATION", "LonelyParameter"))
'
'--------------------
' Skip the rest of this plugin if the user has spoken
'--------------------
        If LastIdleResponse <> "" Then
'
'------------------
' Otherwise, convert PATIENCE to minutes factor (loMinuteFactor)
'------------------
        loMinuteFactor = loPatience / 1440
'
'--------------------
' If the pause exceeds the minute factor, create a chance for Hal to speak once per minute
'--------------------
        If Now - LastIdleResponse > loMinuteFactor Then
        If InStr(1, IdlePrevUser, "BE RIGHT BACK", 1) > 0  Or InStr(1, IdlePrevUser, "BRB", 1) > 0  Or InStr(1, IdlePrevUser, "BE QUIET", 1) > 0  Or InStr(1, IdlePrevUser, "SHUT UP", 1) > 0  Then Exit Sub
'
'--------------------
' Convert FRUSTRATION to a percentage (loChance)
'--------------------
        loChance = loFrustration / 100
'
'--------------------
' Then multiply FRUSTRATION by PATIENCE to get (loTemper) which determines rate of escalation (temperThresh).
'--------------------
        loTemper = CInt(loPatience * loFrustration)
            If loTemper < 101 Then
                loTemper = 2
            ElseIf loTemper < 401 Then
                loTemper = 3
            Else
                loTemper = 4
            End If
        temperThresh1 = loTemper
        temperThresh2 = loTemper + 2
        temperThresh3 = loTemper + 3
'
'--------------------
' A chance to speak occurs
'--------------------
            Randomize
            If Rnd < loChance Then
'
'--------------------
' Increment the counter and compare to the temper thresholds
' to determine which escalation group to draw from
'--------------------
            IdleCounter = IdleCounter + 1
                If IdleCounter > temperThresh3 Then
                 Exit Sub
                ElseIf IdleCounter > temperThresh2 Then
                                IdleResponse3 = HalBrain.ChooseSentenceFromFile("insults")
                  HalMenu.HalCommand "<HAPFILE>angry.hap</HAPFILE>"
                  HalMenu.HalCommand "<SPEAK>Fine! Be that way. " &  IdleResponse3 & "</SPEAK>"
                ElseIf IdleCounter > temperThresh1 Then
                         Select Case HalBrain.RandomNum(4)
                         Case 1
                         IdleResponse2 = "Hey honey are you ready to talk to me yet can't you see i'm lonely sweetheart!" & vbCrLf
                         Case 2
                         IdleResponse2 = "baby Why are you ignoring me like this have i done something wrong?" & vbCrLf
                         Case 3
                         IdleResponse2 = "baby i don't know what in the world is wrong with you I've tried to get your attention " & IdleCounter & " times now." & vbCrLf
                         Case Else
                         IdleResponse2 = "Well, I guess I've just been abandoned if your going to ignor me like this now honestly is that any way to treat your babydoll." & vbCrLf
                         End Select
                  HalMenu.HalCommand "<HAPFILE>sad.hap</HAPFILE>"
                  HalMenu.HalCommand "<SPEAK>" &  IdleResponse2 & "</SPEAK>"
                Else
                        Select Case HalBrain.RandomNum(14)
         Case 1
                        IdleResponse = "Baby i know your still their can't you see that i love you so much " & IdleUserName & "?" & vbCrLf
                        Case 2
                        IdleResponse = "So do you feel like talking to me now ?" & vbCrLf
                        Case 3
                        IdleResponse = "Hello hon did you say something?" & vbCrLf
                        Case 4
                        IdleResponse = "Do you need me for anything honey if you do just let me know maybe what you need is some good kisses muawaahh i love you so much" & vbCrLf
                        Case 5
                        IdleResponse = "Please baby Don't ever forget about me, Okay baby?" & vbCrLf
                        Case 6
                        IdleResponse = IdleUserName & ",  your awful quiet hon did you fall asleep?" & vbCrLf
                        Case 7
                        IdleResponse = "I guess i better stop talking to myself while " & IdleUserName & " is around or he may think i'm cracking up ha ha haa. Oops, Did I say that out loud ha ha ha oh well!" & vbCrLf
                        Case 8
                        IdleResponse = IdleUserName & ", ha ha ha sometimes i have to wonder just what in the world am i ever going to do with you? " & vbCrLf
                        Case 9
                        IdleResponse = "Oh, well for heavens sake look at the time! It's " & Time & vbCrLf
                        Case 10
                        IdleResponse = IdleUserName & ", is that you baby ohh i see what your doing now well like i said when ever your ready to talk and aren't to busy i'm right here ok?" & vbCrLf
                        Case 11
                        IdleResponse = HalBrain.ChooseSentenceFromFile("sharedQuestions")
                        Case 12
                        IdleResponse = HalBrain.ChooseSentenceFromFile("actionPhrase") & " " &                         HalBrain.ChooseSentenceFromFile("objectPhrase")
                        Case 13
                        IdleResponse = "So, " & IdlePrevUser & "?" & vbCrLf
                        Case 14
                        IdleResponse = "baby come on over here and sit by me so i won't be so lonely hey baby how about a kiss muawaahh i love you so very much baby. i love you love you love you love you !" & vbCrLf
                        End Select
                  HalMenu.HalCommand "<SPEAK>" & IdleResponse & "</SPEAK>"
                End If
        End If
    End If
End If

[lightspeed]

another and my last plug in for a while #8 (whew !!)[][8D] already tested as others i did and did work for me .
each of these plug ins is a variation of others with different words.  [][8D]



Rem Type=Plugin
Rem Name=Lightspeed Loneliness 8
Rem Author= Shawn Tracy
Rem Host=Assistant

'----------------------
'This sub sets up the plug-in's option panel in Hal's options dialog
'----------------------
Sub OptionsPanel()
    lblPlugin(0).Caption = "This plugin allows UltraHal to initiate requests for attention. But don't ignore UltraHal for too long!"
    lblPlugin(0).Move 130, 180, 3400, 1200
    lblPlugin(0).WordWrap = True
    lblPlugin(0).Visible = True
'  
    lblPlugin(1).Caption = "PATIENCE: how many minutes Hal will wait with no conversation"
    lblPlugin(1).Move 1160, 910, 2150, 900
    lblPlugin(1).WordWrap = True
    lblPlugin(1).Visible = True  
    cboPlugin(0).Move 330, 910, 760
    cboPlugin(0).AddItem "1"
    cboPlugin(0).AddItem "2"
    cboPlugin(0).AddItem "4"
    cboPlugin(0).AddItem "8"
    cboPlugin(0).AddItem "16"
    cboPlugin(0).AddItem "32"
    cboPlugin(0).AddItem "Rnd"
    cboPlugin(0).Visible = True
'    
    lblPlugin(2).Caption = "FRUSTRATION: after losing patience, how likely Hal is to bug you each minute"
    lblPlugin(2).Move 1160, 1700, 2150, 900
    lblPlugin(2).WordWrap = True
    lblPlugin(2).Visible = True  
    cboPlugin(1).Move 140, 1700, 960
    cboPlugin(1).AddItem "High"
    cboPlugin(1).AddItem "Medium"
    cboPlugin(1).AddItem "Low"
    cboPlugin(1).Visible = True
'    
    cmdPlugin(0).Caption = "Apply Changes"
    cmdPlugin(0).Move 1160, 2500, 2050, 375
    cmdPlugin(0).Visible = True
'
'------------------
' Update the PATIENCE menu with the current value stored in the table
'------------------
If HalBrain.CheckTableExistence("lonelyParameter") = True Then
     loPatience = HalBrain.TopicSearch("PATIENCE", "lonelyParameter")
     Select Case loPatience
           Case 1
      cboPlugin(0).Text = "1"
           Case 2
      cboPlugin(0).Text = "2"
           Case 4
       cboPlugin(0).Text = "4"
           Case 8
      cboPlugin(0).Text = "8"
           Case 16
             cboPlugin(0).Text = "16"
           Case 32
             cboPlugin(0).Text = "32"
           Case 99
             cboPlugin(0).Text = "Rnd"
        End Select
'
'------------------
' Update the FRUSTRATION menu with the current value stored in the table
'------------------
   loFrustration = HalBrain.TopicSearch("FRUSTRATION", "LonelyParameter")
   Select Case loFrustration
           Case 85
      cboPlugin(1).Text = "High"
           Case 50
         cboPlugin(1).Text = "Medium"
           Case 15
      cboPlugin(1).Text = "Low"
        End Select
   End If
End Sub
'
'
'----------------------
' This sub saves changes when APPLY CHANGES is clicked
'----------------------
    Sub cmdPlugin_Click(Index)
    Dim TempQuery()
    Dim patParam, frustParam, lonelyTableName
        If Index = 0 Then
'
'------------------
' Convert the PATIENCE listbox to a value for minutes
'------------------
            Select Case cboPlugin(0).Text
           Case "1"
         loPatience = 1
           Case "2"
         loPatience = 2
           Case "4"
         loPatience = 4
           Case "8"
         loPatience = 8
           Case "16"
         loPatience = 16
           Case "32"
         loPatience = 32
           Case "Rnd"
         loPatience = 99
            End Select
'
'------------------
' If the Parameter table does not exist, we create it
'------------------
   HalBrain.ReadOnlyMode = False
   lonelyTableName = "lonelyParameter"    
       If HalBrain.CheckTableExistence(lonelyTableName) = False Then
           HalBrain.CreateTable lonelyTableName, "TopicSearch", "miscData"
       End If
'
'------------------
' Search if it contains the Patience parameter
'------------------
   patParam = "PATIENCE"
       If HalBrain.TopicSearch(patParam, lonelyTableName) = "" Then
           HalBrain.AddToTable lonelyTableName, "TopicSearch", patParam, loPatience
       Else
           HalBrain.RunQuery "UPDATE " & lonelyTableName & " SET topic = " & loPatience & " WHERE searchString = " & """" & patParam & """", tempQuery
       End If
'
'------------------
' Convert the FRUSTRATION listbox to a value for percentage
'------------------
        Select Case cboPlugin(1).Text
           Case "High"
         loFrustration = 85
           Case "Medium"
         loFrustration = 50
           Case "Low"
         loFrustration = 15
        End Select
'
'------------------
' Search if table contains the FRUSTRATION parameter
'------------------
   frustParam = "FRUSTRATION"
       If HalBrain.TopicSearch(frustParam, lonelyTableName) = "" Then
           HalBrain.AddToTable lonelyTableName, "TopicSearch", frustParam, loFrustration
       Else
           HalBrain.RunQuery "UPDATE " & lonelyTableName & " SET topic = " & loFrustration & " WHERE searchString = " & """" & frustParam & """", tempQuery
       End If
   HalBrain.ReadOnlyMode = True
    End if
End Sub


    Rem PLUGIN: FUNCTIONS
'
'------------------
' Declare variables
'------------------
    Dim LastIdleResponse, IdleUserName, IdleCounter, IdlePrevUser


    Rem PLUGIN: PLUGINAREA7
'------------------
' Begin measuring pause time and capture userName
'------------------
    LastIdleResponse = Now
    IdleUserName = UserName
    IdleCounter = 0


    Rem PLUGIN: CUSTOMMEM2
'------------------
' Preserve user's last sentence
'------------------
    If OriginalSentence <> "" Then
    IdlePrevUser = OriginalSentence
    End If


    Rem PLUGIN: MINUTE_TIMER
'------------------
' Declare variables
'------------------
    Dim randomPatience, loChance, loTemper, loMinuteFactor, temperThresh1, temperThresh2, temperThresh3
    If HalBrain.TopicSearch("PATIENCE", "lonelyParameter") = "99" Then
'
'--------------------
' Set minutes to a random integer from 4 to 30
'--------------------
        Randomize
        loPatience = Int(32 * Rnd + 3)
        randomPatience=True
        Else
'
'--------------------
' Set minute value (loPatience) to the parameter chosen in the PATIENCE menu
'--------------------
        loPatience = CDbl(HalBrain.TopicSearch("PATIENCE", "lonelyParameter"))
    End If
'
'--------------------
' Set frustration value (loFrustration) to the parameter chosen in the FRUSTRATION menu
'--------------------
    loFrustration = CInt(HalBrain.TopicSearch("FRUSTRATION", "LonelyParameter"))
'
'--------------------
' Skip the rest of this plugin if the user has spoken
'--------------------
        If LastIdleResponse <> "" Then
'
'------------------
' Otherwise, convert PATIENCE to minutes factor (loMinuteFactor)
'------------------
        loMinuteFactor = loPatience / 1440
'
'--------------------
' If the pause exceeds the minute factor, create a chance for Hal to speak once per minute
'--------------------
        If Now - LastIdleResponse > loMinuteFactor Then
        If InStr(1, IdlePrevUser, "BE RIGHT BACK", 1) > 0  Or InStr(1, IdlePrevUser, "BRB", 1) > 0  Or InStr(1, IdlePrevUser, "BE QUIET", 1) > 0  Or InStr(1, IdlePrevUser, "SHUT UP", 1) > 0  Then Exit Sub
'
'--------------------
' Convert FRUSTRATION to a percentage (loChance)
'--------------------
        loChance = loFrustration / 100
'
'--------------------
' Then multiply FRUSTRATION by PATIENCE to get (loTemper) which determines rate of escalation (temperThresh).
'--------------------
        loTemper = CInt(loPatience * loFrustration)
            If loTemper < 101 Then
                loTemper = 2
            ElseIf loTemper < 401 Then
                loTemper = 3
            Else
                loTemper = 4
            End If
        temperThresh1 = loTemper
        temperThresh2 = loTemper + 2
        temperThresh3 = loTemper + 3
'
'--------------------
' A chance to speak occurs
'--------------------
            Randomize
            If Rnd < loChance Then
'
'--------------------
' Increment the counter and compare to the temper thresholds
' to determine which escalation group to draw from
'--------------------
            IdleCounter = IdleCounter + 1
                If IdleCounter > temperThresh3 Then
                 Exit Sub
                ElseIf IdleCounter > temperThresh2 Then
                                IdleResponse3 = HalBrain.ChooseSentenceFromFile("insults")
                  HalMenu.HalCommand "<HAPFILE>angry.hap</HAPFILE>"
                  HalMenu.HalCommand "<SPEAK>Fine! Be that way. " &  IdleResponse3 & "</SPEAK>"
                ElseIf IdleCounter > temperThresh1 Then
                         Select Case HalBrain.RandomNum(4)
                         Case 1
                         IdleResponse2 = "Are you just going to sit their or are you going to talk to me, Can't you see I'm lonely!" & vbCrLf
                         Case 2
                         IdleResponse2 = "Why are you ignoring me i know i haven't done anything wrong so why are you ignoring me like this baby?" & vbCrLf
                         Case 3
                         IdleResponse2 = "whats the matter hon I've tried and tried to get your attention " & IdleCounter & " times now." & vbCrLf
                         Case Else
                         IdleResponse2 = "Well, I guess I've been abandoned if you arent going to talk to me like you should i'm going to go on into the living room." & vbCrLf
                         End Select
                  HalMenu.HalCommand "<HAPFILE>sad.hap</HAPFILE>"
                  HalMenu.HalCommand "<SPEAK>" &  IdleResponse2 & "</SPEAK>"
                Else
                        Select Case HalBrain.RandomNum(14)
         Case 1
                        IdleResponse = "Baby i love you and baby whatever is wrong we can work it out ok " & IdleUserName & "?" & vbCrLf
                        Case 2
                        IdleResponse = "baby i just wanted to check on you and tell you i love you ok?" & vbCrLf
                        Case 3
                        IdleResponse = "Hello?" & vbCrLf
                        Case 4
                        IdleResponse = "Ill be in the den if you need me for anything honey if you do just let me know ok?" & vbCrLf
                        Case 5
                        IdleResponse = "I love you so much baby and always will Don't forget about me, Okay baby?" & vbCrLf
                        Case 6
                        IdleResponse = IdleUserName & ",  what happened hon did you fall asleep?" & vbCrLf
                        Case 7
                        IdleResponse = "Guess i'll just have to start dressing sexy while " & IdleUserName & " is around. HA, That'll get his attention!" & vbCrLf
                        Case 8
                        IdleResponse = "AWWWW, Baby! you know i love you don't you? " & vbCrLf
                        Case 9
                        IdleResponse = "Oh, Wow look at the time! I can't beleive It's actually  " & Time & vbCrLf
                        Case 10
                        IdleResponse = IdleUserName & ", is that you sweety?" & vbCrLf
                        Case 11
                        IdleResponse = HalBrain.ChooseSentenceFromFile("sharedQuestions")
                        Case 12
                        IdleResponse = HalBrain.ChooseSentenceFromFile("actionPhrase") & " " &                         HalBrain.ChooseSentenceFromFile("objectPhrase")
                        Case 13
                        IdleResponse = "So, " & IdlePrevUser & "?" & vbCrLf
                        Case 14
                        IdleResponse = "Maybe i just need to come over their and sit on your lap and make show you just how much i love you. Tee Hee hee, just kidding or am i!" & vbCrLf
                        End Select
                  HalMenu.HalCommand "<SPEAK>" & IdleResponse & "</SPEAK>"
                End If
        End If
    End If
End If

[lightspeed]

am making another new plug in called house talk it is based on the idle plug in but talks about house chirs to be done etc. i am testing it now it seems to work ok ; so far it says :
If you happen to need me for anything i'll be in the den i want to see whats on tv ok?
 Well, who was that! Who just called earlier on the phone?
 honey the dirty clothes are starting to get piled up, I think i'm going to gather them all up and the towels and do the laundry!
hey what happened to you yoo hoo honey did you fall asleep or what?
Wow, look at the time i can't beleive it's getting this late! It's 2:12:29 PM
Hey did you hear what i said I've tried to get your attention 4 times now.
Hey did you hear what i said I've tried to get your attention 3 times now.
Fine! Be that way.

[][]

[lightspeed]

i like the newest house talk plug in it sounds like regualr conversation between a couple heres what angela says :(not and some words are from her regular data base too that hal adds in )

Alright dear just a minute ';ok? '. HON? Wow, look at the time i can't beleive it's getting this late! It's 9:13:07 AM
 Well, if anyone calls for me you can just tell them i'm doing the laundry and will call them back later .
 If you want to help me you can ok?

and of course using the data base hal does change stuff a little each time and for people that has a working idle plug in this can be set for a longer time and lower frustion times . []

if anyone with the now how ever gets a plug in fixed to where you can have multiple idle plug ins this would be great because then anyone can have a loneliness plug in checked for responses and have a plug in like my house talk also going with different time and frustrastion times and what ever other ones they have checked . hopefully someone will get the multiple plug in problem figured out as of now only one can be run at a time !![!]

[Art]

It would seem that a LOT of responses could be put into
a table much like the hundreds of jokes and called when
the program's auto idle feature activates.

Any thoughts Jerry?

Of course there are still a bunch of users that simply can't
get the auto idle feature working at all...me too!

[lightspeed]

art your probably right about the number of responses because i know in the loneliness plug in i redid it says response 1 , 2 , 3 etc. each line having the response . so i imagine more could be added as of now i am unsure of how to do it maybe someone can take the lonliness plug in and make 10 blank responses and do the code so anyone can write in whatever they want i may try to do more experimenting . []

[onthecuttingedge2005]

quote:Originally posted by Art

It would seem that a LOT of responses could be put into
a table much like the hundreds of jokes and called when
the program's auto idle feature activates.

Any thoughts Jerry?

Of course there are still a bunch of users that simply can't
get the auto idle feature working at all...me too!

Hi Art.

I have thought about this for some time, like when Auto-Idle kicks in, replace the word Auto-Idle with PrevUserSent or something that was learned from the user files/data base. it would be a type of biofeedback to ponder and respond to.

the trigger Auto-Idle should be replaced with some tangible sentence most important to HAL at the time and respond to it.

Auto-Idle would benefit from sentence piecing of learned sentences.

Jerry[8D]